Read Sharp MX-M850 (serv.man39) Service Manual online
MX-M1100 MAINTENANCE 9 – 9
7)
Remove the blue screw (a), and remove the bearing (b) and
bearing (c).
* When installing the bearing, fit the D-cut direction and
bearing (c).
* When installing the bearing, fit the D-cut direction and
engage it properly.
8)
Hold the handle (a), and pull out the process unit (b) until it
stops.
stops.
9)
Hold the green label section (a) of the process unit frame, and
lift it up and remove it completely.
lift it up and remove it completely.
10) Check the OPC drum (a) at every 500K.
* Place the cleaner unit on the lower side.
11) Remove the blue screw (a), and open the frame (b).
12) Remove the OPC drum unit (a).
* Use a great care not to damage the OPC drum.
c
b
a
a
a
d
d
a
b
a
a
a
a
a
b
a
Click on the first or last page to see other MX-M850 (serv.man39) service manuals if exist.