Read Sharp MX-M850 (serv.man2) Handy Guide online
- 5 -
MX
MX
MX
MXM850/950/1100 Production Configuration Options
M850/950/1100 Production Configuration Options
M850/950/1100 Production Configuration Options
M850/950/1100 Production Configuration Options
w
w
w
with Plockmatic Bookletmaking System
ith Plockmatic Bookletmaking System
ith Plockmatic Bookletmaking System
ith Plockmatic Bookletmaking System
•
The Plockmatic bookletmaker (and options) replaces the Saddle Unit (MXFNX8).
Cannot
have both in an installation.
•
The Rail unit (MXXBX1) MUST
MUST
MUST
MUST be ordered with every bookletmaker unit (MXBMX1)
•
The Trimmer unit (MXTMX1) and/or the Covers Insertion Module (MXCFX3) require the basic bookletmaker (MXBMX1)
to be installed
to be installed
•
The Squarefold unit (MXFDX2) requires the Trimmer unit and
and
and
and the basic bookletmaker unit.
•
The Covers Insertion Module fits under the top cover of the booklemaker and takes up no additional space. If option is
not taken, the aperture is blocked off.
not taken, the aperture is blocked off.
•
The output module bolts to whichever unit is the last in the installation. It is delivered as part of the basic bookletmaker
unit.
unit.
•
The Plockmatic should always be configured with the MXLCX5 to provide adequate A3 and or A4R paper supply,
commensurate with production booklet production.
commensurate with production booklet production.
•
The Trimmer option (MXTMX1) should always be included where booklets over 15 sheets (@ 80gsm) are being produced;
if 90 or 100gsm then trimmer is required around 12 sheets.
if 90 or 100gsm then trimmer is required around 12 sheets.
•
Preprinted covers for booklets can be inserted via the inline inserter (MXCFX2) or the Covers Insertion Module option
(MXCFX3) on the top of the bookletmaker. Both can be included in the configuration.
(MXCFX3) on the top of the bookletmaker. Both can be included in the configuration.
•
MXCFX2 (Inserter) – up to A3 – max 205 gsm
•
MXCFX3 (Covers Module) – up to SRA3 – max 300 gsm.
This should be the preferred option if the
Customer does a lot of preprinted covers.
Operation with BMX1
Option
Description
In
Configuration
Docked
Un Docked
MXCFX2
Inserter
Y
Y
Y
MXFDX1
ZFold
Y
N
Y
MXFNX8
Saddle Unit
N
MXGBX1
GBC SmartPunch
Y
N
N
Print Controller Options
Print Controller Options
Print Controller Options
Print Controller Options
Part No.
Description
Part No.
Description
MXPBX2
Integrated Printer Expansion Kit (PCL only)
MXPEX3 External EFI Fiery Print Controller
MXPKX4 PS option for above
OR
OR
OR
OR
MXPXX3
Interface Cable (MUST HAVE)
Hole Punch Options
Hole Punch Options
Hole Punch Options
Hole Punch Options
Please refer to page 8
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Scanning, Fax and Other Options
Please refer to page 7
Covers Insertion Module
MX-CFX3
Rail Unit
MX-XBX1
Trimmer
MX-TMX1
MX-TMX1
Bookletmaker
MX-BMX1
Squarefold Unit
MX-FDX2
Covers Insertion Module
MX-CFX3
Rail Unit
MX-XBX1
Trimmer
MX-TMX1
MX-TMX1
Bookletmaker
MX-BMX1
Squarefold Unit
MX-FDX2
For power requirements please refer to page 9
For power requirements please refer to page 9
For power requirements please refer to page 9
For power requirements please refer to page 9
Click on the first or last page to see other MX-M850 (serv.man2) service manuals if exist.