Read Sharp MX-M850 (serv.man14) Service Manual online
MX-M1100 DSPF SECTION C – 25
7)
Remove the spring (a) and the screw (b), and remove the plate
(c).
(c).
8)
Remove the screw (a), and remove the DSPF scan transport
motor (b).
motor (b).
(3) DSPF resist motor / DSPF transport motor
1)
Remove the rear cabinet.
2)
Disconnect the connector (a) and the screw (b), and remove
the stay (c).
the stay (c).
3)
Loosen the screw (a). Slide the DSPF resist motor (b) and the
DSPF transport motor (c) to reduce the tension of the belt (d).
Tighten the screw (a).
* Before installing the resist transport drive unit, perform this
DSPF transport motor (c) to reduce the tension of the belt (d).
Tighten the screw (a).
* Before installing the resist transport drive unit, perform this
procedure. After installing the paper feed scan transport
drive unit, set the spring in the compressed state to apply a
tension to the belt.
drive unit, set the spring in the compressed state to apply a
tension to the belt.
4)
Remove the screw (a), and remove the resist transport drive
unit (b).
unit (b).
5)
Remove the screw (a), and remove the DSPF resist motor (b)
and the DSPF transport motor (c).
and the DSPF transport motor (c).
a
b
c
a
b
a
a
b
c
a
a
a
a
a
b
c
d
d
a
b
a
b
c
Click on the first or last page to see other MX-M850 (serv.man14) service manuals if exist.