MX-M700U (serv.man9). Software Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 39

Read Sharp MX-M700U (serv.man9) User Guide / Operation Manual online

37
IF THE SOFTWARE CANNOT BE INSTALLED
The machine is not 
detected (when 
connected to a 
network).
Is the machine power on?
If the machine is powered off, it will not be detected. 
Switch on the main power switch and power switch in 
that order. (In Windows, search again after powering on 
the machine.)
Is your computer connected correctly to 
the machine?
Make sure that the cable is connected securely to the 
LAN connectors on your computer and the machine.
Check the connections at the hub as well.
CONNECTING THE MACHINE TO A NETWORK  
(page 7)
The plug and play 
screen does not 
appear (USB 
connection in 
Windows).
Is the machine power on?
When a USB cable is connected, make sure the power 
of the machine is "ON" and then connect a USB cable to 
the machine. When the machine is not powered on, 
switch on the main power switch and power switch in 
that order.
Can your computer use a USB 
connection?
Check your computer whether or not a USB interface 
can be used on the Device Manager in your computer. 
(For information on "Device Manager", see Help in 
Windows.)
If USB can be used, your controller chipset type and 
root hub will appear in "Universal Serial Bus controllers" 
in "Device Manager". (The items that appear will vary 
depending on your computer.)
If these two items appear, USB should be useable. If a 
yellow exclamation point appears next to "Universal 
Serial Bus controllers" or the two items do not appear, 
refer to your computer manual or check with the 
manufacturer of your computer to enable USB and then 
reinstall the printer driver.
The printer driver is 
not installed correctly 
by plug and play (USB 
connection in 
Windows).
Did you connect the machine to your 
computer before installing the printer 
driver?
In Windows 2000/XP/Server 2003, if the machine was 
connected to your computer with a USB cable before 
the printer driver was installed from the installer, check if 
information on the unsuccessful installation remains in 
"Device Manager". (For information on "Device 
Manager", see Help in Windows.)
If the model name of the machine appears in "Other 
devices" in "Device Manager", delete it, restart your 
computer, and install the printer driver again.
Problem
Point to check
Solution
!mx7000_us_ins.book  37 ページ  2006年10月18日 水曜日 午前10時33分
Page of 44
Display

Click on the first or last page to see other MX-M700U (serv.man9) service manuals if exist.