Read Sharp MX-M700U (serv.man3) Service Manual online
: Jan. 9 2004
1
AR-M550/M620/M700 INSTALLATION MANUAL (AR-CF2) 3 - 2
4) Remove the tape and open the base cover.
5) Remove the connector cable fixing tape.
2. Installation
(Packaged parts check)
• Check to insure that all the following parts are packaged.
(1) Turn off the power of the main unit
1) Turn OFF the power switch on the right side of the main unit.
2) Open the front cabinet, and turn OFF the main power switch.
3) Disconnect the power plug from the power outlet.
<When the finisher (F15) or the saddle finisher (F16) is
installed>
installed>
(2) Removal of the connector between the main unit and
the finisher
1) Remove the screw from the finisher connector connected to the left
side of the main unit.
2) Disconnect the finisher connector.
Parts name
Quantity
1
Positioning plate
1 pc.
2
Upper limit regulation wire
1 pc.
3
Button cover
1 pc.
4
Screw C (M4 x 12 small screw bind)
3 pcs.
5
Screw D (M3 x 8 tapping bind)
2 pcs.
6
Screw E (M4 x 7 small screw bind)
2 pcs.
7
Screw F (M4 x 14 tapping bind)
2 pcs.
1
3
7
5
6
4
2
1
1
1
1
∗
If it is not installed, perform procedure (4).
1
2
3
1
1
2
Click on the first or last page to see other MX-M700U (serv.man3) service manuals if exist.