Read Sharp MX-M654N / MX-M754N (serv.man3) Service Manual online
SPECIFICATIONS 2 – 11
E. Condition Settings
User authentication every time
This function enforces print users to execute user authentication.
Yes
Yes
Force Retention
This function enforces print users to use retention function.
Yes
Yes
Force B&W print
This function enforces print users to print in monochrome.
N/A
N/A
Acquisition of Windows login name
Windows login name information can be applied to the login name for
printer driver.
printer driver.
Yes
Yes
Billing cord
It’s selectable every item whether user choose charging on job
running.
running.
Yes
Yes
Force Retention of Printer job by MFP
This function enforces to save all printer job to HDD of MFP inspite of
setting for retention.
(Forbiding to print of DSK function except holding is diferrent
function, because it deletes automatically the job without saving.)
setting for retention.
(Forbiding to print of DSK function except holding is diferrent
function, because it deletes automatically the job without saving.)
Yes
Yes
Toner save mode
Toner save mode (1 level)
(3 levels: separately supported by the driver)
(3 levels: separately supported by the driver)
Yes
Yes
Smoothing (RET)
Support RET (resolution enhancement techniques)
To smooth the edges of image and reduce jagged lines in order to
obtain virtually high resolution.
To smooth the edges of image and reduce jagged lines in order to
obtain virtually high resolution.
Yes
Yes
Trapping
Select to prevent void area which may be generated around edge of
colors.
colors.
No
No
Sharpness
This is used to sharpen an image or make it softer.
5 levels (Sharp: 2 levels, Soft: 2 levels)
5 levels (Sharp: 2 levels, Soft: 2 levels)
Yes
Yes
Custom Image
Custom image can be stored and registered in MFP through printer
driver.
driver.
Yes
No
Function Flow Lite
Print & Send. “Send” can be specified by printer driver.
Yes
No
Auto Offset cancellation at only one sheet
of output
of output
When only 1 page is printed in a job and it is output from the finisher,
offset is canceled automatically.
offset is canceled automatically.
No
No
Saddle fold at only one sheet of output
It’s able to saddle fold even if when out put sheet is only one in 1 job.
Yes
Yes
Offset by each specified number of sets
when no staples
when no staples
Offset by each specified number of sets when printing
No
No
Lot4 support
Duplex setting is default when printing.
And do not pass through duplex path for one page job. (For EU only)
And do not pass through duplex path for one page job. (For EU only)
Yes
Yes
(Only Windows)
Crop mark
Print corner crop marks and center crop marks when printing full
fixed size data on larger-than-fixed-size sheet.
fixed size data on larger-than-fixed-size sheet.
No
No
Centerfold insertion
Inserts a sheet from the inserter at the last page of pamphlet as
centerfold.
centerfold.
No
No
Trimming width adjustment
Trimming width by the trimmer is adjustable for saddle stitching and
saddle folding.
saddle folding.
Yes
Yes
Extended maximum number of sheets for
insertion
insertion
Extends the maximum number of insert for cover / back cover / insert
to 1000 sheet.
to 1000 sheet.
Yes
Yes
(Only Windows)
Continuous insertion of cover / insert
Enables continuous insertion (including paper feeding from the
inserter)
inserter)
Yes
Yes
(Only Windows)
Put inserts before the back cover
It’s able to put inserts before the back cover.
Yes
Yes
(Only Windows)
Cover/Insert multiple selection/deletion
It’s able to choose multiple inserted pages and delete them.
Yes
Yes
(Only Windows)
Separator page insertion
Enables to insert separator pages between sets / jobs.
Yes
Yes
(Only Windows)
Disabling blank print by printer driver
Enables to disable the blank print from the printer driver.
Yes
Yes
(Only Windows)
Number-of-set management number
print
Adds the number for managing number of sets in multiple set
printing.
printing.
Yes
No
Printable area adjustment
Expand engine void to 1.5mm.
Yes
Yes
(Only Windows)
AirPrint support
Support AirPrint which is the standard print service of iOS.
It supports version after iOS 5.0.
It supports version after iOS 5.0.
No
No
Image rotation of custom size
It’s able to print for both Short edge direction (Landscape) and Long
Edge direction (Portrait)
Edge direction (Portrait)
Yes
Yes
Carbon Copy
This function makes possible to print data to several different types
of paper by using different paper trays.Carbon copy’s paper feeding
order is displayed on the print driver.
of paper by using different paper trays.Carbon copy’s paper feeding
order is displayed on the print driver.
Yes
Yes
(Only Windows)
Displaying paper weight
Paper types’ weight is displayed on the print driver’s dialog. Target
paper types are Thin paper, Plain paper, and Heavy paper 1-3.
paper types are Thin paper, Plain paper, and Heavy paper 1-3.
Yes
Yes
(Only Windows)
Support four-digit number of sets
Support acceptable number of sets up to 9999 sets
Yes
Yes
CMYK Image Enhancement
Correct the gray scale density when CMYK data is printed out from
applications by PS driver.
applications by PS driver.
No
Yes
(Only Windows)
Setting item
Description
Initial setting
Basic settings for printer use such as number of copies or printing direction.
PCL setting
Setting of PCL symbols and fonts.
PS setting
Setting of allowing or not allowing printing and binary output during PS error.
2
: ‘16/Apr
2
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man3) service manuals if exist.