MX-M550U, MX-M620U (serv.man9). Software Setup Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 33

MAC OS X

+

• The procedure for configuring the printer driver varies depending on the operating system version. The procedure for versions 

10.4 - 10.4.8 and the procedure for other versions are explained separately below.

• The machine can print using the IPP function. If you wish to use the IPP function, see "Printing using the IPP function" (page 

33) to configure the printer driver settings.

If multiple AppleTalk zones are displayed, select the 
zone that includes the printer from the menu.

• The machine's model name usually appears as 

[SCxxxxxx]. ("xxxxxx" is a sequence of 
characters that varies depending on your model.)

• The PPD file of the machine is automatically 

selected.

The PPD file of the machine is automatically 
selected and the peripheral devices installed on the 
machine are detected and automatically configured.

If multiple AppleTalk zones are displayed, select the 
zone that includes the printer from the menu.

The machine's model name usually appears as 
[SCxxxxxx]. ("xxxxxx" is a sequence of characters 
that varies depending on your model.)

• If you are using Mac OS X v10.1.5, select [Other]. 

The PPD file selection window will appear. Click 
[Startup disk name] - [Library] - [Printers] - [PPDs] 
- [Contents] - [Resources] - [en.lproj] - "PPD file 
for your model", and then click the [Choose] 
button.

• If you are using Mac OS X v10.2.8, select [Sharp] 

and click the PPD file of your model.

• If you are using Mac OS X v10.3.9, select [Auto 

Select].

If you are using Mac OS X v10.3.9, the PPD file of 
the machine is automatically selected and the 
peripheral devices installed on the machine are 
detected and automatically configured.

The PPD file is installed in the following folders on the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - [Resources] - [en.lproj]

!mx7000_us_ins.book  31 ページ  ２００６年１０月１８日　水曜日　午前１０時３３分