Read Sharp MX-M550U / MX-M620U (serv.man7) User Guide / Operation Manual online
0-2
Improper installation may damage this product. Please note the following during initial installation and whenever the
machine is moved.
machine is moved.
1.The machine should be installed near an
accessible power outlet for easy connection.
2.Be sure to connect the power cord only to a
power outlet that meets the specified voltage and
current requirements. Also make certain the
outlet is properly grounded.
●For the power supply requirements, see the
current requirements. Also make certain the
outlet is properly grounded.
●For the power supply requirements, see the
name plate on the back of the main unit.
3.Do not install your machine in areas that are:
●damp, humid, or very dusty
●exposed to direct sunlight
●poorly ventilated
●subject to extreme temperature or humidity
●exposed to direct sunlight
●poorly ventilated
●subject to extreme temperature or humidity
changes, e.g., near an air conditioner or heater.
4.Be sure to allow the required space around the
machine for servicing and proper ventilation.
A small amount of ozone is produced within the printer during operation. The emission level is insufficient to cause
any health hazard.
NOTE:
any health hazard.
NOTE:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 m
g/m
3
) calculated as an 8 hr. time-
weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier
in a ventilated area.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier
in a ventilated area.
15cm
(6-1/8")
60cm
(23-5/8")
(23-5/8")
30cm
(11-13/16")
(11-13/16")
INSTALLATION REQUIREMENTS
Click on the first or last page to see other MX-M550U / MX-M620U (serv.man7) service manuals if exist.