Read Sharp MX-M364N / MX-565N Handy Guide online
Initial Setup
SHARP
Document Solution Centre
9
DEVELOPER SET-UP
Sim 25-02
Auto Developer Adjustment - Select K.
Toner Installation must be performed after Auto Developer Adjustment is
completed.
completed.
**For optimum image quality & performance, it is recommended to setup &
install developer at the customer site.
install developer at the customer site.
TONER INSTALLATION & REPLENISHMENT
Install K Toner Cartridge
Caution:
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation Mode
during Initial Toner Replenishment.
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation Mode
during Initial Toner Replenishment.
PRODUCT ACTIVATION & FIRMWARE UPGRADE
Activation of Optional Product(s):-
System Settings – Administrator Mode – Product Key.
Sim 22-05
Check Firmware version(s):-
Upgrade to latest version.
INITIAL SETUP
Sim 26-01
Right Tray Installation
Yes/No.
Sim 26-02
LCC Installation (Paper Size):-
A4.
Sim 26-06
Machine Destination.
Sim 26-35
Set Multi Error Counter
Set to 1 (Multi Count).
Sim 26-50
Long Paper Support (up to 1200mm),
0 = Disable, 1 = Enable
.
Sim 26-52
Non Printed Paper Counter Set-up.
Sim 55-03
Process Mixed Size Pages (orientation) when Printing in Duplex:-
SSW 3-6,
SSW 3-6,
0 = Disable, 1 = Enable.
Sim 55-03
Toner Remain Status Display: SSW 22-5,
0 = Disable, 1 = Enable.
System Settings: Adjust Date/Time (Inc. Daylight Saving setting).
Network Settings – Print Port Settings: Disable WSD.
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type Setting:-
System Settings – Paper Tray Settings.
IMAGE SKEW [ENGINE]
Sim 64-02
Check LSU Parallelism.
Select A=1, B=1, C=254, D=255
Click on the first or last page to see other MX-M364N / MX-565N service manuals if exist.