Read Sharp MX-M364N / MX-565N (serv.man63) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
[Description]
No.
Item
Details
1
Print processing
Correction of printing in solid black
This phenomenon occurred when halftone process control and expansion of CMYK / 8
bit data for output of Print job were executed simultaneously.
This phenomenon occurred when halftone process control and expansion of CMYK / 8
bit data for output of Print job were executed simultaneously.
2
Specifications
Support for Scan accessory kit MX-AP14
3
Scanner
Improvement of speed for monochrome scan
4
Network
Modification has been made to enhance the security level for Web access.
Following features have been added/changed to perform after the log-in with [User
Authority: users] or [Administrator Authority: admin]
- Add User Authority (Login Name: User).
- Change the top screen when accessing the web page to Loin screen.
Initial values of access authority and password for User and Administrator are as below:
- Access Authority
User Authority (added): Same as the existing operation which can perform on Top
screen.
Administrator Authority: Same as the existing administrator login authority.
- Initial value of password for each authority
User Authority: users
Administrator Authority: admin
- Inheritance of the password already set up
If the passwords for the administrator and user have already set up before updating the
firmware, the passwords already set up will be inherited after the firmware update.
(*Passwords for the administrator and user have already set up will not be reset.)
- Enable/disable the additional features
Those features will be enabled once this firmware is applied.
For the setting change, those features can be switched between ON and OFF on the
setup item of the main unit or by checking/unchecking the checkbox of “Restrict Device
Web Page Access Via Password” in “Security Settings” on the top page of Web page.
Checked: Enabled
Unchecked: Disabled
Following features have been added/changed to perform after the log-in with [User
Authority: users] or [Administrator Authority: admin]
- Add User Authority (Login Name: User).
- Change the top screen when accessing the web page to Loin screen.
Initial values of access authority and password for User and Administrator are as below:
- Access Authority
User Authority (added): Same as the existing operation which can perform on Top
screen.
Administrator Authority: Same as the existing administrator login authority.
- Initial value of password for each authority
User Authority: users
Administrator Authority: admin
- Inheritance of the password already set up
If the passwords for the administrator and user have already set up before updating the
firmware, the passwords already set up will be inherited after the firmware update.
(*Passwords for the administrator and user have already set up will not be reset.)
- Enable/disable the additional features
Those features will be enabled once this firmware is applied.
For the setting change, those features can be switched between ON and OFF on the
setup item of the main unit or by checking/unchecking the checkbox of “Restrict Device
Web Page Access Via Password” in “Security Settings” on the top page of Web page.
Checked: Enabled
Unchecked: Disabled
5
Network
Enabling display of Machine ID information in MIB
6
Network
Changing factory default for LPD timeout from 0 (infinite) to 90 sec.
*This value won't change after upgrading the firmware in field.
*This value won't change after upgrading the firmware in field.
7
Network
Modification of data transmission error which occurred while executing Scan to
Network Folder for the second time using SMBv2.
Network Folder for the second time using SMBv2.
8
Network
Modification of an error of IEEE802.1X authentication via wired LAN
9
Network
Modification of rare machine lockup
This problem occurred during start-up of the device while DHCP setting was enabled.
This problem occurred during start-up of the device while DHCP setting was enabled.
10 Main unit control
Correction of L8-20 trouble
This trouble occurred if notification processing of the status was not done properly
between internal modules.
This trouble occurred if notification processing of the status was not done properly
between internal modules.
11 FAX
Correction of PPD2_PRI jam which occurred under following conditions:
- Fax Soft SW (SW38-8) was set to "Do not output error page in case of fax data
reception error".
- Communication error occurred while receiving Fax image data.
- The device was printing data.
- Fax Soft SW (SW38-8) was set to "Do not output error page in case of fax data
reception error".
- Communication error occurred while receiving Fax image data.
- The device was printing data.
Click on the first or last page to see other MX-M364N / MX-565N (serv.man63) service manuals if exist.