Read Sharp MX-M364N / MX-565N (serv.man59) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
[
Description]
No.
Item
Details
1
Main unit control
Implementation of remedy to prevent F2-64 error
2
UI
Correction of failure to log out of Vendor mode screen The problem occurs when vendor
mode and device account mode are enabled together. The MFP fails to log out of vendor
mode screen that Copy mode screen is displayed.
mode and device account mode are enabled together. The MFP fails to log out of vendor
mode screen that Copy mode screen is displayed.
3
Network
Modification has been made to enhance the security level for Web access.
Following features have been added/changed to perform after the log-in with [User
Authority: users] or [Administrator Authority: admin]
- Add User Authority (Login Name: User).
- Change the top screen when accessing the web page to Loin screen.
Initial values of access authority and password for User and login Administrator are as
below:
*Access Authority
User Authority (added): Same as the existing operation which can perform on Top
screen.
Administrator Authority: Same as the existing administrator login authority.
*Initial value of password for each authority
User Authority: users
Administrator Authority: admin
*Inheritance of the password already set up
If the passwords for the administrator and user have already set up before updating the
firmware, the passwords already set up will be inherited after the firmware update.
(*Passwords for the administrator and user have already set up will not be reset.)
*Enable/disable the additional features
Those features will be enabled once this firmware is applied.
For the setting change, those features can be switched between ON and OFF on the
setup item of the main unit or by checking/unchecking the che
Following features have been added/changed to perform after the log-in with [User
Authority: users] or [Administrator Authority: admin]
- Add User Authority (Login Name: User).
- Change the top screen when accessing the web page to Loin screen.
Initial values of access authority and password for User and login Administrator are as
below:
*Access Authority
User Authority (added): Same as the existing operation which can perform on Top
screen.
Administrator Authority: Same as the existing administrator login authority.
*Initial value of password for each authority
User Authority: users
Administrator Authority: admin
*Inheritance of the password already set up
If the passwords for the administrator and user have already set up before updating the
firmware, the passwords already set up will be inherited after the firmware update.
(*Passwords for the administrator and user have already set up will not be reset.)
*Enable/disable the additional features
Those features will be enabled once this firmware is applied.
For the setting change, those features can be switched between ON and OFF on the
setup item of the main unit or by checking/unchecking the che
ckbox of “Restrict Device
Web Page Access Via Password
” in “Security Settings” on the top page of Web page.
Checked: ON (Factory default setting)
Unchecked: OFF
*If you upgrade the firmware of machines in field from ROM control No. B03 (or older) to
this "ROM control No. C00", the default setting will be "Unchecked: OFF".
4
Network
Enabling display of Machine ID information in MIB
5
Network
Changing factory default for LPD timeout from 0 (infinite) to 90 sec.
*This value won't change after upgrading the firmware in field.
*This value won't change after upgrading the firmware in field.
6
Network
Modification of an error of IEEE802.1X authentication via wired LAN
7
Network
Modification of data transmission error which occurred while executing Scan to Network
Folder for the second time using SMBv2.
Folder for the second time using SMBv2.
8
Network
Correction of MFP lock up
The phenomenon may occur under the network environment where massive amount of
packet data flow into MFP while performing such job as broadcasting.
The phenomenon may occur under the network environment where massive amount of
packet data flow into MFP while performing such job as broadcasting.
9
Network
Modification of the problem that the machine may lock up if the timeout error occurs
when performing FSS communication by HTTP communication via Proxy server.
when performing FSS communication by HTTP communication via Proxy server.
10 Printer
Correction of the problem that the data may be printed in solid black if the processing of
CMYK 8bit expansion and the processing of halftone process control are performed
simultaneously.
CMYK 8bit expansion and the processing of halftone process control are performed
simultaneously.
11 Printer
Correction of logo data in black and white output garbled.
Click on the first or last page to see other MX-M364N / MX-565N (serv.man59) service manuals if exist.