Read Sharp MX-M364N / MX-565N (serv.man4) Service Manual online
MX-M565N ADJUSTMENTS AND SETTINGS 4 – 41
b. Adjustment procedure
YE S
NO
YE S
NO
NO
YE S
Copy gray balance and density adjustment (Manual adjustment) procedure
flowchart (SIM46-16)
flowchart (SIM46-16)
Start
Execute ADJ11C(2) (Copy gray balance and density adjustment)
(Manual adjustment). (*1)
(Manual adjustment). (*1)
Enter the SIM46-16 mode, and select A4 (11" x 8.5") paper.
(Automatic selection)
(Automatic selection)
Press [EXECUTE]
key.
(The adjustment check pattern is printed.)
Enter the adjustment value with 10-key.
Refer to the printed adjustment check pattern.
Select a target adjustment level with the scroll key.
Are the gray balance
and density at the sati-
sfactory level?
and density at the sati-
sfactory level?
Press [EXECUTE] key.
(The adjustment check pattern is printed.)
(The adjustment check pattern is printed.)
Are the gray balance
and density at the sati-
sfactor y level?
and density at the sati-
sfactor y level?
Are the gray balance
and density at the sati-
sfactor y level?
and density at the sati-
sfactor y level?
Cancel the SIM46-16 mode.
Perform the initial setting of the halftone image correction.
(SIM44-21)
(SIM44-21)
Chec k the copy gray balance and density adjustment result with the
test char t. (*1)
test char t. (*1)
Use the test char t (UK OG-0326FCZZ/UK OG-0326FC11)
to make a copy in the Text/Printed Photo mode, and chec k
the gray balance and density.
to make a copy in the Text/Printed Photo mode, and chec k
the gray balance and density.
Chec k to confirm that the initial setting of the halftone image correction is
properly set. (*2)
properly set. (*2)
Perform the initial setting of the halftone image correction.
(SIM44-21)
(SIM44-21)
Perform the halftone image correction. (SIM44-26)
Use the test char t (UK OG-0326FCZZ/UK OG-0326FC11)
to make a copy in the Text/Printed Photo mode, and chec k
the gray balance and density.
to make a copy in the Text/Printed Photo mode, and chec k
the gray balance and density.
Set the SERVICE target for the automatic copy gray
balance adjustment. (SIM63-7)
balance adjustment. (SIM63-7)
End
*1:
If satisf actor y gray balance and density are not
obtained with the adjustment, chec k the print
engine for any problems .
*2:
If the initial setting of the halftone image
correction is not properly adjusted, satisf actor y
gray balance and density cannot be obtained. In
this case , chec k the print engine for any problems .
If satisf actor y gray balance and density are not
obtained with the adjustment, chec k the print
engine for any problems .
*2:
If the initial setting of the halftone image
correction is not properly adjusted, satisf actor y
gray balance and density cannot be obtained. In
this case , chec k the print engine for any problems .
Check the gray balance and density in the gray balance
check pattern.
check pattern.
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.