Read Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man18) Service Manual online
MX-M503N MX-RP11 28 – 4
Is there a
resistance in the
section B?
Yes
No
Increase the
clearance in
the section F
until there is a
resistance in
the section B.
However, the
max. is 5.0mm.
clearance in
the section F
until there is a
resistance in
the section B.
However, the
max. is 5.0mm.
c) Adjust the section F.
*
If not, loosen the fixing nut and turn the section E to adjust.
Use a clearance gauge to check to confirm that the clearance
in the section F is 4.3mm - 5.0mm.
in the section F is 4.3mm - 5.0mm.
Turn section E clockwise to lift the RSPF unit. Turn it
counterclockwise to move down the RSPF unit.
counterclockwise to move down the RSPF unit.
* Insert a clearance gauge in the range of 20mm from the
edge (a) of the OC mat.
Adjust the
section F.
E
20mm
a
Section
F
4.3
-
5.0mm
1
: '10/Jun/18
1
Click on the first or last page to see other MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man18) service manuals if exist.