MX-M363N, MX-M363U, MX-M503N, MX-M503U (serv.man117). NOTES FOR INSTALLING MX-PB11 (PRINTER KIT). - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man117) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
 
 
Description of the installation procedures for the printer kit MX-PB11 after revision, “G. 
Preparation for enabling the MX-PB11” 
 
G. Preparation for enabling the MX-PB11 
1) To enable the MX-PB11, enter the product key by the key operation of the copier 
machine. 
a) Turn on the power. 
b) Error code U2-22 is displayed. 
NOTE: U2-22 error in this case is displayed upon initializing memory data inside the 
machine, and not one displayed due to a machine fault. 
c) Cancel the error code U2-22 with simulation 16. 
(The product key input menu is displayed.) 
d) Enter the product key with numeric key (10-key), and touch the [Registration] 
key. 
 
2) After the product key has been entered, turn OFF the power switch on the operation 
panel.  
Turn OFF the main power switch, then turn ON the power switch and the main power 
switch again. 
 
3) Use the attached CD-ROM to install the driver. 
For installing procedures, refer to the software setup guide. 
Installation of the driver must be performed by the user or the serviceperson with 
assistance of the user. 
 
NOTE: 
(Description of the “U2-22” error code being displayed upon installation of the printer kit 
MX-PB11) 
The “U2-22” error code is displayed upon installing MX-PB11 because memory 
“U2-22” error code remains displayed, the display must be cancel by simulation 16. 
 
If any trouble occurs during installation procedures, cancel the trouble. 
 
 
Page of 2
Display

Download Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man117) Technical Bulletin