MX-M363N, MX-M363U, MX-M503N, MX-M503U (serv.man101). Setup procedure changes when changing delivery tray options - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man101) Technical Bulletin online

 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
 
[Setup procedure summary] 
 
When not attaching the finisher 
 
When attaching the finisher 
No. Procedure   
No. 
Procedure 
1 
Release the machine lock 
 
1 
Release the machine lock 
2 
Attach the delivery tray 
cabinet unit (Delivery 
tray cabinet, Delivery 
tray cabinet left, full 
detection actuator, 
Delivery cover, etc.). 
(For details refer to the 
attached procedure) 
 2 
Attach the relay unit and 
the inner finisher. 
(For details refer to the 
attached procedure) 
Attach the finisher and 
the punch unit. 
(For details refer to the 
setup manual) 
3 
After the delivery tray 
cabinet unit has been 
attached remove the inlet 
cover and connect the AC 
cord. 
 3 
After the relay unit, 
finisher, and punch unit 
have been attached 
remove the inlet cover 
and connect the AC cord. 
4 
Follow the procedures in 
the setup manual, pages 
1-4 "B. Developer 
supply". 
 4 
Follow the procedures in 
the setup manual, pages 
1-4 "B. Developer 
supply". 
 
 
* When setting up a machine for Europe, the setup procedure for the paper pass 
unit (MX-RBX3) and the inner finisher (MX-FNX9) varies. However, the setup 
procedure for other options, including the finisher (MX-FN10, MX-FN11), is the 
same as in the setup instructions. 
 
 
Notes: 
Always unplug the machine until the attachment of the delivery tray 
cabinet unit, relay unit, and the inner finisher is complete as certain 
parts of the delivery section can conduct electricity. 
 

Display

Click on the first or last page to see other MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man101) service manuals if exist.

Random: