Read Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man24) User Guide / Operation Manual online
KEY OPERATOR PROGRAMS
8-3
8
USING THE KEY OPERATOR PROGRAMS
Follow these steps to configure the settings in the key operator programs.
1
Press the [CUSTOM SETTINGS] key.
2
Touch the [KEY OPERATOR PROGRAMS]
key.
key.
3
Use the numeric keys to enter the five-digit
key operator code number.
key operator code number.
For the factory default
setting for the key
operator code number,
see page 2 of the key
operator's guide.
setting for the key
operator code number,
see page 2 of the key
operator's guide.
4
Touch the [IMAGE SEND SETTINGS] key.
5
Touch the [OPERATION SETTINGS] key or
the [FAX SETTINGS] key to display the key
operator programs.
the [FAX SETTINGS] key to display the key
operator programs.
6
Select the desired program and configure
the setting.
the setting.
Page 8-2 shows the programs that can be selected.
The settings for each of the programs are explained
on the following pages.
The settings for each of the programs are explained
on the following pages.
7
Press the [CA] key to exit the program.
Supplementary explanation of key operation for key operator programs
A The name of the program category or particular item to be set will appear on the touch key. The displayed item
is selected by touching the key.
B Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off status
changes each time the box is touched.
changes each time the box is touched.
C If the settings continue on the following screen(s), touch the
and
keys to move back and forth through
the screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
E Numerical values can be set by touching the
and
keys.
KEY OPERATOR PROGRAMS
SENDER CONTROL
LIST PRINT
FAX DATA
RECEIVE/FORWA
DEFAULT
SETTINGS
KEY OPERATOR CODE
COPY SETTINGS
DOC. FILING
SETTING
CONTROL
DEVICE CONTROL
IMAGE SEND
SETTINGS
CONTROL
E SEND SETTINGS
OPERATION SETTINGS
FAX SETTINGS
I-FAX SETTINGS
15
(1
15)
A
KEY OPERATOR PROGRAMS
OPERATION SETTINGS
1/2
INITIAL RESOLUTION SETTING
THE NUMBER OF FILE NAME/
SUBJECT KEYS DISPLAYED SETTING
MUST INPUT NEXT ADDRESS
KEY AT BROADCAST SETTING
OK
DEFAULT DISPLAY SETTINGS
THE NUMBER OF DIRECT ADDRESS/
SENDER KEYS DISPLAYED SETTING
B
C
D
E
6
6
These keys and indicator are
available on setting screens that
require the entry of numerical values.
Click on the first or last page to see other MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man24) service manuals if exist.