Read Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man21) User Guide / Operation Manual online
4
USING THE ADMINISTRATOR SETTINGS
The procedure for configuring the administrator password is explained below using the "Change admin password" as
an example. Follow the same steps to configure the settings that are described beginning on page 7.
an example. Follow the same steps to configure the settings that are described beginning on page 7.
1
Press the [SYSTEM SETTINGS] key.
2
Touch the [ADMINISTRATOR SETTINGS]
key.
key.
3
Use the numeric keys to enter the 5-digit
administrator password.
administrator password.
Each time a number is
entered, the dashes (-)
in the display will change
to asterisks ( ). The
factory default setting for
the administrator
password is 00000.
entered, the dashes (-)
in the display will change
to asterisks ( ). The
factory default setting for
the administrator
password is 00000.
4
Touch the [CHANGE ADMIN PASSWORD]
key .
key .
If you wish to configure a
different administrator
setting, select the
desired setting in this
step.
different administrator
setting, select the
desired setting in this
step.
A screen for the selected
setting will appear.
setting will appear.
Configure the setting as explained on pages 7 and
following of this manual.
following of this manual.
5
Use the numeric keys to enter the new
5-digit administrator password.
5-digit administrator password.
Use a number for the
administrator password
that has not been set as
an account number for
auditing mode (a
number that has been
set as an account
administrator password
that has not been set as
an account number for
auditing mode (a
number that has been
set as an account
number cannot be used). The entered number will
be the new administrator password. Be sure to
remember this number.
be the new administrator password. Be sure to
remember this number.
6
Touch the [OK] key. You will return to the
screen of step 4.
screen of step 4.
This completes the
procedure for changing
the administrator
password. If you wish to
configure another
setting, touch the key of
the desired setting in the
screen of step 4.
procedure for changing
the administrator
password. If you wish to
configure another
setting, touch the key of
the desired setting in the
screen of step 4.
7
Touch the [EXIT] key.
You will exit the
administrator settings.
administrator settings.
PY
JOB STATUS
SYSTEM
SETTINGS
ADMINISTRATOR SETTINGS
SENDER CONTROL
FAX DATA
RECEIVE/FORWARD
ADMINISTRATOR PASSWORD
CHANGE ADMIN
PASSWORD
NGS
PRINTER
SETTINGS
00000
-----
OK
OPERATION
SETTINGS
EXIT
PRINTER
1/2
JupiterII_Admin_ex.fm 4 ページ ２００７年１月１６日 火曜日 午後１時２１分
Click on the first or last page to see other MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man21) service manuals if exist.