Read Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) Service Manual online
MX-M350/M450 N/U SIMULATION 9 - 10
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
played.
The active sensors and detectors are highlighted.
Operation/Procedure
1) Select the number corresponding to the target of operation
check with 10-key.
2) Press [START] key.
The load selected in procedure 1 is operated.
Press [SYSTEM SETTINGS] key to stop the operation of the load.
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
played.
The active sensors and detectors are highlighted.
5
Staple rear one-position
binding position adjustment
binding position adjustment
0 - 200
100
0.04374mm
6
Staple front one-position
binding position adjustment
binding position adjustment
0 - 200
100
0.04374mm
7
Staple 2-position binding
center adjustment
center adjustment
0 - 200
100
0.04374mm
8
Staple 2-position binding pitch
adjustment
adjustment
0 - 99
50
0.04374mm
9
Punch center adjustment
(Slide direction)
(Slide direction)
47 - 53
50
1mm
10 Punch hole position
adjustment (Paper feed
direction)
direction)
0 - 99
50
0.105mm
Press [START] key, and the operation
is started.
is started.
Press [SYSTEM SETTINGS] key, and
the operation is stopped.
the operation is stopped.
3-20
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the mail bin stacker sensor.
Section
Mail bin stacker
Item
Operation
MPFD1
Tray 1 paper full detection
MPFD2
Tray 2 paper full detection
MPFD3
Tray 3 paper full detection
MPFD4
Tray 4 paper full detection
MPFD5
Tray 5 paper full detection
MPFD6
Tray 6 paper full detection
MPFD7
Tray 7 paper full detection
MPFD8
Tray 8 paper full detection
MPID
Interface unit paper entry detection
MPPD1
Paper transport sensor 1
MPPD2
Paper transport sensor 2
MPPD3
Paper transport sensor 3
MPPD4
Paper transport sensor 4
MPPD5
Paper transport sensor 5
M24VM
24V power supply
MDD1
Jam cancel door
MDOPD
Interface unit door
Item
Set
range
Initial
value
value
1STEP
SIMULATION 3-10
CONSOLE FINISHER SETTING. SELECT 1-10,AND PRESS START.
1.SADDLE POSITION 2.FOLDING POSITION
3.FRONT ADJUST
4.REAR ADJUST 5.STAPLE REAR
6.STAPLE FRONT 7.STAPLE BOTH
8.STAPLE PITCH 9.PUNCH CENTER
10.PUNCH HOLE
CONSOLE FINISHER SETTING. SELECT 1-10,AND PRESS START.
1.SADDLE POSITION 2.FOLDING POSITION
3.FRONT ADJUST
4.REAR ADJUST 5.STAPLE REAR
6.STAPLE FRONT 7.STAPLE BOTH
8.STAPLE PITCH 9.PUNCH CENTER
10.PUNCH HOLE
1
SIMULATION 3-10
CONSOLE FINISHER SETTING. INPUT VALUE, AND PRESS START.
1.SADDLE POSITION
200
SIMULATION 3-20
MAIL BOX SENSOR CHECK.
MPFD1
MPFD2 MPFD3 MPFD4 MPFD5 MPFD6 MPFD7
MPFD8 MPID MPPD1 MPPD2 MPPD3 MPPD4 MPPD5
M24VM MDD1 MDOPD
3-21
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the mail bin
stacker loads.
stacker loads.
Section
Mail bin stacker
Item
Operation
1
MM
Main motor
2
GSOL1
Gate solenoid 1
3
GSOL2
Gate solenoid 2
4
GSOL3
Gate solenoid 3
5
GSOL4
Gate solenoid 4
6
GSOL5
Gate solenoid 5
7
GSOL6
Gate solenoid 6
8
GSOL7
Gate solenoid 7
Press [START] key, and the operation
is started.
is started.
Press [SYSTEM SETTINGS] key, and
the operation is stopped.
the operation is stopped.
4
4-2
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the sensors and
detectors in the paper feed section (desk paper
feed/large capacity tray) and the related circuit.
detectors in the paper feed section (desk paper
feed/large capacity tray) and the related circuit.
Section
Paper feed
Item
Operation
SIMULATION 3-21
MAIL BOX LOAD TEST. SELECT 1-8 AND PRESS START.
1.MM
2.GSOL1
3.GSOL2
4.GSOL3
5.GSOL4
6.GSOL5
7.GSOL6
8.GSOL7
MAIL BOX LOAD TEST. SELECT 1-8 AND PRESS START.
1.MM
2.GSOL1
3.GSOL2
4.GSOL3
5.GSOL4
6.GSOL5
7.GSOL6
8.GSOL7
2
SIMULATION 3-21
MAIL BOX LOAD TEST. EXECUTING....
1.MM
MAIL BOX LOAD TEST. EXECUTING....
1.MM
2.GSOL1
3.GSOL2
4.GSOL3
5.GSOL4
6.GSOL5
7.GSOL6
8.GSOL7
3.GSOL2
4.GSOL3
5.GSOL4
6.GSOL5
7.GSOL6
8.GSOL7
2
Click on the first or last page to see other MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) service manuals if exist.