Read Sharp MX-M310 / MX-M310N (serv.man2) Handy Guide online
19
Main
Sub
Contents
22
02
Used to check the total numbers of misfeed and troubles. (When
the number of misfeed is considerably great, it is judged as
necessary for repair. The misfeed rate is obtained by dividing this
count value with the total counter value.)
the number of misfeed is considerably great, it is judged as
necessary for repair. The misfeed rate is obtained by dividing this
count value with the total counter value.)
03
Used to check the misfeed positions and the number of misfeed at
each position. (When the number of misfeed is considerably great,
it can be judged as necessary for repair.)
each position. (When the number of misfeed is considerably great,
it can be judged as necessary for repair.)
04
Used to check the total trouble (self diag) history.
05
Used to check the ROM version of each unit (section).
06
Used to print each key operator setting, the account information,
and the machine adjustment values.
and the machine adjustment values.
07
Used to display of the administrator password.
08
Used to display the original, staple counter.
09
Used to check the number of use of each paper feed section. (the
number of prints)
number of prints)
10
Used to check the system configuration.
11
Used to display the FAX send/receive counter (FAX reception and
print counter).
print counter).
12
Used to check the misfeed positions and the number of misfeed at
each position. (When the number of misfeed is considerably great,
it can be judged as necessary for repair.)
each position. (When the number of misfeed is considerably great,
it can be judged as necessary for repair.)
13
Used to display the CRUM type.
19
Used to display the scanner counter in the network scanner mode.
24
01
Used to clear the misfeed counter, the misfeed history, the trouble
counter, and the trouble history. (The counters are cleared after
completion of maintenance.)
counter, and the trouble history. (The counters are cleared after
completion of maintenance.)
02
Used to clear the number of use (the number of prints) of each
paper feed section.
paper feed section.
03
Used to clear the number usage data of the stapler, RSPF, and
scanning.
scanning.
04
Used to reset the maintenance counter.
05
Used to reset the developer counter. (The developer counter of the
DV unit which is installed is reset.)
DV unit which is installed is reset.)
06
Used to clear the copy counter.
07
Used to clear the OPC drum (membrane decrease) correction
counter. (This simulation is executed when the OPC drum is
replaced.)
counter. (This simulation is executed when the OPC drum is
replaced.)
09
Used to clear the printer counter and other counters.
10
FAX counter data clear
15
Used to clear the scanner counter in the network scanner mode.
25
01
Used to check the operation of the main drive (excluding the
scanner section) and to check the operation of the toner
concentration sensor. (The toner concentration sensor output can
be monitored.)
scanner section) and to check the operation of the toner
concentration sensor. (The toner concentration sensor output can
be monitored.)
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man2) service manuals if exist.