MX-M266N, MX-M316N, MX-M356N (serv.man5). Installation Manual (Revised December 2016). - Sharp Copying Equipment Service Manual (repair manual). Page 51

MX-M316N  MX-FR48U / FR50U(DATA SECURITY KIT)  17 – 1

MX-M316N

ervice Manual

 

NOTE: Before installing the data security kit, be sure to perform

backup of data stored in the memory (including HDD) of the
main unit.

When the data security kit is installed, all the job data
stored in the memory (including HDD) of the main unit will
be lost.

NOTE: If the LINE indicator or the DATA indicator for the printer

and image transmission on the operation panel is lit or
blinking, data that has not been processed remains in the
memory of the main unit (including HDD). Output or trans-
mit all the data to clear the data remaining in the main unit
and then start installation. 

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation. 

1)

Remove the rear cabinet.

2)

Disconnect the FFC.

3)

Remove the shield plate.

1) Attach the program ROM to the OPT ROM slot of the MFP con-

trol PWB.

2) Set the BOOT SW on the right side of the MFP control PWB to

OFF.

1)

Fix the shield plate.

1

Program ROM

1

2

Product key sheet

1

3

User manual (CD-ROM)

1

/04

BOOT SW

: ‘15/Aug.