MX-M264N, MX-M264NR, MX-M264NV, MX-M264U, MX-M314N, MX-M314NR, MX-M314NV, MX-M314U, MX-M354N, MX-M354NR, MX-M354U (serv.man6). Installation Manual (Revised April 2016). - Sharp Copying Equipment Service Manual (repair manual). Page 10

MX-M264U  Transit, Installation (using) environment, Note   - iii

When handling the OPC drum and developing units, observe the
following items.
Drum unit
• To prevent  damage to the OPC drum, avoid working on the drum

unit in high intensity light areas.

• When the OPC drum is removed from the machine, cover it with

light blocking material. (When using paper, use about 10 sheets
of paper to cover it.)

• Be careful not to attach fingerprints, oil, grease, or other foreign

material on the OPC drum surface.

Developing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the developing unit.

Fusing unit
• Be careful not to "leave” fingerprints, oil, grease, or other foreign

material on the fusing roller.

If these items are neglected, a trouble may be generated in the
copy and print image quality.

It is recommendable to use a forklift for bringing in the machine for
safety.
If no forklift is available, man-power of two persons is required. The
machine is considerably heavy, and requires safety precautions for
delivery and installation.
Transit of the machine must be made in packed condition to the
installing place.
Use care not to exert vibrations or shocks to the machine when in
transit.

Remove the packing materials prior to installation in the office envi-
ronment.

1

Implements, facility, 
and man power

Use a forklift. (If no forklift is available, 
manpower of two persons is required.) 

2

Delivery

Transit must be made in packed condition.