Read Sharp MX-M232D Handy Guide online
Firmware Upgrade Procedure
21
Document Solutions After Sales Service
MX-NB12 Network Expansion Kit
Requirements:
USB Memory device (Formatted with FAT or FAT32)
MX-NB12 Firmware
Note: Never insert a USB memory device containing MX-NB12 firmware (*.brn) before powering
on the machine.
Procedure:
o
Copy the MX-NB12 firmware onto the root directory of a USB memory device
o
Power on the MFP
o
After approximately 30 seconds, (Time taken for the NB12 to boot up) insert the USB
memory device into the USB Device Port on the MX-NB12 as shown below.
o
Enter Test Command 49-02
o
"Download mode" is displayed on the operation panel display.
o
"Do not turn the power off." is displayed, and downloading of the firmware is started.
Note: During execution of the simulation, do not perform a key operation of the operation
panel.
o
When downloading is completed, "Processing is finished. Turn off the power." is
displayed.
o
Turn off the power to the machine
o
Remove the USB memory device
Updating of the MX-NB12 is now complete
Click on the first or last page to see other MX-M232D service manuals if exist.