MX-M182, MX-M182D (serv.man3). NOTE - Handy Guides are NOT a substitute for Service Manuals and Parts Guides. - Sharp Copying Equipment Handy Guide. Page 21

 

 

Document Solutions After Sales Service 

 

 
 
MX-NB12 Network Expansion Kit 
 
Requirements: 
 
USB Memory device (Formatted with FAT or FAT32) 
MX-NB12 Firmware 
 
Note: Never insert a USB memory device containing MX-NB12 firmware (*.brn)  before powering 
on the machine. 
 
Procedure: 
 
 

o

  Copy the MX-NB12 firmware onto the root directory of a USB memory device 

 

o

  Power on the MFP 

 

o

  After approximately 30 seconds, (Time taken for the NB12 to boot up) insert the USB 

memory device into the USB Device Port on the MX-NB12 as shown below. 
 

 

 

o

  Enter Test Command 49-02 

 

o

  "Download mode" is displayed on the operation panel display. 

 

o

  "Do not turn the power off." is displayed, and downloading of the firmware is started. 

 
Note:  During execution of the simulation, do not perform a key operation of the operation 
panel. 

 

o

  When downloading is completed, "Processing is finished. Turn off the power." is 

displayed.  

 

o

  Turn off the power to the machine 

 

o

  Remove the USB memory device 

 

Updating of the MX-NB12 is now complete