Read Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man8) User Guide / Operation Manual online
22
SCAN
BUTTON MANAGER SETTINGS
If you need to configure Button Manager settings, follow the steps below. For details on Button Manager settings,
see Button Manager Help.
see Button Manager Help.
(page 21)
1
Right-click the Button Manager icon
(
(
) on the task bar and select
[Settings] from the pop-up menu.
The Button Manager settings will open.
2
Click the tab that you wish to
configure.
configure.
3
Set up the start-up application in the
"Application Selection" area.
"Application Selection" area.
4
Select scanning conditions such as
"Color Mode" and "Scanning Side" in
the "Scan Setup" area.
"Color Mode" and "Scanning Side" in
the "Scan Setup" area.
• If you placed a two-sided original in the RSPF,
select [Duplex-Book] or [Duplex-Tablet] as
appropriate for the position of the binding on
the original.
appropriate for the position of the binding on
the original.
• The name of the tab can be changed. Click the
[Menu Name] button and enter a new name.
After entering a name, click the [Apply] button
or [OK] button. This also changes the scan
destination name that appears on the machine.
(Example: SC1: XXXXX)
After entering a name, click the [Apply] button
or [OK] button. This also changes the scan
destination name that appears on the machine.
(Example: SC1: XXXXX)
5
Click the [OK] button.
This completes the settings.
If the Button Manager icon does not appear on
the task bar, click the [start] button, select [All
Programs] ([Programs] in Windows 2000),
select [Sharp Button Manager W], and then
click [Button Manager] to start Button
Manager. The Button Manager icon appears
on the task bar.
the task bar, click the [start] button, select [All
Programs] ([Programs] in Windows 2000),
select [Sharp Button Manager W], and then
click [Button Manager] to start Button
Manager. The Button Manager icon appears
on the task bar.
• If the [Show TWAIN setting screen when
scanning] checkbox is selected, the
setting screen will appear when scanning
is executed to let you adjust the scanning
conditions.
setting screen will appear when scanning
is executed to let you adjust the scanning
conditions.
• If an application other than [FAX] is
selected, you can select the "File format"
of the scanned image. If [PDF] is selected
for the file format, the image quality may
be slightly degraded.
of the scanned image. If [PDF] is selected
for the file format, the image quality may
be slightly degraded.
Note
Note
• If you selected [Duplex-Book] or
[Duplex-Tablet] from the "Scanning Side"
menu, select "Right edge is fed first" or
"Top edge is fed first" for the orientation of
the original.
menu, select "Right edge is fed first" or
"Top edge is fed first" for the orientation of
the original.
• For original sizes for which two-sided
scanning is possible, see "REVERSING
SINGLE PASS FEEDER / SINGLE PASS
FEEDER" in "3. PERIPHERAL DEVICES
AND SUPPLIES" in the "Operation
manual (for general information and
copier)".
SINGLE PASS FEEDER / SINGLE PASS
FEEDER" in "3. PERIPHERAL DEVICES
AND SUPPLIES" in the "Operation
manual (for general information and
copier)".
• Some settings cannot be selected in
some applications.
• When [Show TWAIN setting screen when
scanning] is selected, only [Menu name]
can be selected.
can be selected.
Note
Click on the first or last page to see other MX-M160 / MX-M160D / MX-M160DK (serv.man8) service manuals if exist.