Read Sharp MX-M1055 / MX-M1205 Service Manual online
MX-M1205 EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 1
MX-M1205
Service Manual
[4] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Identification of each section and functions
A. Exterior
No.
Name
Function / Operation
Note
1
Finisher
This can be used to staple output. The optional punch module can be installed to punch holes in
output. (100-sheet stapling)
output. (100-sheet stapling)
* Peripheral device.
2
Finisher
This can be used to staple output. The optional punch module can be installed to punch holes in
output. (50-sheet stapling)
output. (50-sheet stapling)
* Peripheral device.
3
Saddle stitch finisher
The output is folded at the center. The saddle stitch function staples output at the centerline. (100-
sheet stapling)
sheet stapling)
* Peripheral device.
4
Saddle stitch finisher
The output is folded at the center. The saddle stitch function staples output at the centerline. (50-
sheet stapling)
sheet stapling)
* Peripheral device.
5
Trimming module
An extended section when performing center stapling can be cut out.
* Peripheral device.
6
Punch module
This is used to punch holes in output. Requires the finisher (large capacity) or the saddle stitch
finisher (large capacity).
finisher (large capacity).
* Peripheral device.
7
Decurler unit
Corrects curl of printed paper properly.
* Peripheral device.
8
Tray 1 (left side)
This holds paper. Up to 1200 sheets of paper can be loaded. (80g/m
2
)
9
Tray 2 (right side)
This holds paper. Up to 800 sheets of paper can be loaded. (80g/m
2
)
1
4
5
11
9
12
6
7
8
10
2
3
19
14
15
16
17
18
20
13
Click on the first or last page to see other MX-M1055 / MX-M1205 service manuals if exist.