Read Sharp MX-LCX5 (serv.man4) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
1.Model Name: MX-LCX4/LCX5
2.General:
Information of the adjustment method for separation pressure when supplying paper
with the optional large capacity trays (MX-LCX4/LCX5) offered for the MX-
M850/M950/M1100 Series, which was not included in the service manual.
with the optional large capacity trays (MX-LCX4/LCX5) offered for the MX-
M850/M950/M1100 Series, which was not included in the service manual.
3.Overview:
Separating pressure can be adjusted by changing the position of the gear attached to
the separating roller axle in the paper feed unit.
Adjusting the separating pressure can improve margins for problems involving special
paper (e.g. specially coated paper, etc).
the separating roller axle in the paper feed unit.
Adjusting the separating pressure can improve margins for problems involving special
paper (e.g. specially coated paper, etc).
1. When problems arise with multiple sheets being made a double feeding only when
special paper is used [JAM Codes: DPFJ_SL1, DPFJ_SL2, DPFJ_SL3, DPFJ_SLM]
[Solution] Move the position of the gear attached to the separation roller axle
[Solution] Move the position of the gear attached to the separation roller axle
towards the R side.
2. When frequent problems arise with paper feeding trouble only when special paper is
used (sheets are picked, but not moved by the paper feed roller) [JAM Codes:
L1TS_N, L2TS_N, L3TN_N, MTS_N]
[Solution] Move the position of the gear attached to the separation roller axle
L1TS_N, L2TS_N, L3TN_N, MTS_N]
[Solution] Move the position of the gear attached to the separation roller axle
towards the F side.
* The adjustment described here may produce adverse affects. Make sure that you
understand the content of this information and take due care when making any
adjustments.
adjustments.
ADJUSTMENT OF SEPARATION PRESSURE WHEN
FEEDING FROM LARGE CAPACITY TRAYS.
TECHNICAL BULLETIN
Date:
1
st
February 2008
Model: MXM M850/950/1100
Ref.:
Ref.:
REF018
Colour:
White
Page:
1 of 1
Sharp Electronics (UK) Ltd., Technical Services Group
[Adjustment Procedure]
1. Detach the paper feed unit from the large capacity tray. (Refer to the service manual for instructions
on how to do detach the paper feed unit.)
2. Loosen the adjustment screw with an Allen wrench.
3. Move the position of the gear and tighten the screw with an Allen wrench
.
3. Move the position of the gear and tighten the screw with an Allen wrench
.
[Position]
A. Normal Position
In the standard attachment position for gear B, the left side of the gear is flush with the right hand side
of the groove on the axle.
of the groove on the axle.
Sharp Electronics (UK) Ltd., Technical Services Group
B. Adjusting Gear Position to R Side
- Reduces pressure placed on the paper feed roller by the separation roller (lower separation pressure)
[Effects] Improves margins of double feeding of multiple sheets
[Adverse Affects] Reduces margins of paper feed roller slippage
C. Adjusting Gear Position to F Side
- Increases pressure placed on the paper feed roller by the separation roller (higher separation
pressure)
pressure)
[Effects] Improves margins of paper feed roller slippage
[Adverse Affects] Reduces margins of double feeding