Read Sharp MX-LCX3N (serv.man2) Service Manual online
MX-7040N MX-LCX3N (LARGE CAPACITY TRAY) 5 – 10
2)
Set a sheet of paper on the paper feed base tray. Check that
the front regulation plate is at the marked center, and push it in
contact with the front regulation plate. Loosen the blue screws
of the rear regulation plate.
the front regulation plate is at the marked center, and push it in
contact with the front regulation plate. Loosen the blue screws
of the rear regulation plate.
3)
Use the mark of the rear regulation plate, and fix the blue
screws at the position so that the clearance between paper
and the rear regulation plate is evenly 1mm.
screws at the position so that the clearance between paper
and the rear regulation plate is evenly 1mm.
NOTE: The positions of the regulation plates are even to the
right and left marks.
b. Diagonal feed adjustment
1)
1)
Press the lock button on the front cabinet and lower the paper
feed base tray to the paper supply position. Pull out the tray.
feed base tray to the paper supply position. Pull out the tray.
2)
Adjust the diagonal feed.
In the case of diagonal feed 1
Loosen the blue screw (A) on the front regulation plate.
Referring to the degree of diagonal feed, move the regulation
plate in the direction of (-) and fix the blue screw.
Loosen the blue screw (A) on the front regulation plate.
Referring to the degree of diagonal feed, move the regulation
plate in the direction of (-) and fix the blue screw.
1mm
Diagonal feed 1
Transport
direction
Diagonal feed 2
1
3
2
3
A
Click on the first or last page to see other MX-LCX3N (serv.man2) service manuals if exist.