MX-LCX3N (serv.man2). MX-LCX3N Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 7

Read Sharp MX-LCX3N (serv.man2) Service Manual online

MX-7040N  MX-LCX3N (LARGE CAPACITY TRAY)  5 – 7
E. Select the paper size
1)
Slowly pull out the paper feed tray until it stops.
2)
Side plate size adjustment.
<1>
Loosen the wing bolt (A) on the front and the rear side of the
LCC upper part, and slide the handle to the neutral position.
<2>
Move the side plate to the desired paper size position.
<3>
Slide the handle to the desired paper size position, and lock it
and tighten the wing bolt (A).
3)
Rear edge plate size changeover
<1>
Lift the MC-CL handle at the top of the rear edge plate and
shift it to the desired paper size position.
<2>
Insert the lead edge of the movable shaft into the hole in the
lower section of the rear edge plate with the upper lever, and
lock the rear edge plate to the desired paper size position.
<3>
Push the large capacity tray into the closed (locked) position.
F. Turn on the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
A3/A4
12/A3W
11
8.5
A4R
B4/B5
A3/A4
12/A3W
11
8.5
A4R
B4/B5
A
A
Page of 11
Display

Click on the first or last page to see other MX-LCX3N (serv.man2) service manuals if exist.