MX-LCX3N (serv.man2). MX-LCX3N Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 6

Read Sharp MX-LCX3N (serv.man2) Service Manual online

MX-7040N  MX-LCX3N (LARGE CAPACITY TRAY)  5 – 6
[How to separate the LCC from the machine]
1)
Remove the left front cabinet of the LCC.
2)
Remove the positioning plate installed to the front and the rear
sides of the left lower side of the LCC.
Front side
Rear side
3)
Raise the adjusters on the front and the rear sides of the lower
section of the LCC right side.
4)
Push the resin cover part beneath the lock section on the top
of the left side of the LCC to shift the LCC to the right. Release
the top lock.
5)
Shift the LCC to the right to separate.
D. Connector connection
1)
Remove the screw from the upper connector cover and
remove the cover to install the LCC. The lower connector
cover is for the heating interface harness.
2)
Connect the large capacity tray interface harness connector to
the upper connector (a) and secure the connector with the
screw that is molded in the connector. If a heater interface is
being installed, connect the interface harness for the heater in
connector (b) - the lower connector.
a
b
Page of 11
Display

Click on the first or last page to see other MX-LCX3N (serv.man2) service manuals if exist.