Read Sharp MX-LCX3N (serv.man2) Service Manual online
MX-7040N MX-LCX3N (LARGE CAPACITY TRAY) 5 – 3
Rear side
b. When the height is not properly adjusted:
Use the adjustment device on the lower left side of the LCC to
adjust the height of the left caster section.
Front side
Use the adjustment device on the lower left side of the LCC to
adjust the height of the left caster section.
Front side
Rear side
<1>
Loosen the hex washer based screws on the both ends of the
caster movable plate on the front and the rear sides.
Loosen the hex washer based screws on the both ends of the
caster movable plate on the front and the rear sides.
<2>
Turn the adjustment screw behind the plate to adjust the
height.
After adjustment tighten the screws on the both ends of the
caster movable plate which were loosened in the previous pro-
cedure.
Turn the adjustment screw behind the plate to adjust the
height.
After adjustment tighten the screws on the both ends of the
caster movable plate which were loosened in the previous pro-
cedure.
NOTE: Adjust so that the marks on the left and the right sides
of the caster movable plate and the lead edge of the triangular
hole are at the same height.
of the caster movable plate and the lead edge of the triangular
hole are at the same height.
R
Click on the first or last page to see other MX-LCX3N (serv.man2) service manuals if exist.