MX-LCX3N (serv.man2). MX-LCX3N Installation Manual - Sharp Copying Equipment Service Manual (repair manual). Page 2

Read Sharp MX-LCX3N (serv.man2) Service Manual online

MX-7040N  MX-LCX3N (LARGE CAPACITY TRAY)  5 – 2
B. Attach the mounting plate upper and the lower 
front/rear connecting plate
1)
Attach the mounting plates upper (Packed items) with the fix-
ing screw A (Packed items) to the installation part of right side
of the main unit. When installing, put the rubber section (
) of
the mounting plates upper on the lower side of each plate.
2)
Remove the fixing screws of the front/rear cover on the lower
part of the main unit. Attach the connecting plate lower front
(Packed items) to the lower front side of the main unit with the
fixing screw B (Packed items).
Attach the connecting plate lower rear (Packed items) to the
lower rear side of the main unit with the fixing screw B (Packed
items).
NOTE: Remove the front and rear covers, then remove the
screws (in the rear side only) as shown in the figure
below. (The removed screws are not used.)
3)
Remove the fixing screws (2 pcs.) of the machine entry port,
and remove the entry port cover.
4)
Reverse the entry port cover and re-attach it to the machine.
Secure it with the two previously removed screws in procedure
3).
NOTE: Be careful not to make a scratch for the paper pass
surface of entrance cover at the installation.
C. Installation to the main unit and height 
adjustment
1)
Use the edge of the connection plates F/R mounted to the
lower side of the machine and the mark on the mounting plate
in the lower left side of the LCC to check the installation height.
Front side
Rear side
a. When the height is properly adjusted:
When connecting plates, front and rear, and mounting plates
are aligned to the center hash mark, install the positioning
plates (Packed items) and secure each with a screw B
(Packed items) to lock the LCX3N to the  machine.
Front side
F
Page of 11
Display

Click on the first or last page to see other MX-LCX3N (serv.man2) service manuals if exist.