Read Sharp MX-LCX1 Specification online
MX-LCX1 SPECIFICATIONS 2 – 1
Service Manual
[2] SPECIFICATIONS
Type
Externally mounted 3500-sheet paper feeder
Transport speed
Operable within the speed range of 124 to 360 mm/s (Speed can be selected using a communication command).
Transport reference
Center reference
Paper size
AB series: A4, 8.5" x 11"
AB, B5 series: A4, B5, 8.5" x 11”
Inch series: 8.5" x 11", A4
AB, B5 series: A4, B5, 8.5" x 11”
Inch series: 8.5" x 11", A4
Paper size setting
Service engineer support/simulation setup
Factory default paper size setting
AB series: A4
Inch series: 8.5" x 11"
Inch series: 8.5" x 11"
Paper type setting
Provided
Supported paper types/weight
Plain paper, printed paper, recycled paper, letter head, pre-punched paper, color paper: 60 to 105 g/m
2
(16 to 28 lbs)
Paper capacity
3500 sheets (80 g/m
2
(21 lbs)), at effective height of 385 mm
Paper level detection
The paper feeder detects the amount of remaining paper and indicates one of seven levels (100%, 83.3%, 66.7%, 50.0%,
33.3%, 16.7%, and none) on its own panel or on the printer's display.
33.3%, 16.7%, and none) on its own panel or on the printer's display.
Paper refill method
Front loading type; paper can be refilled from the upper part.
Drive mechanism
Transport motor (brushless DC motor) controlled by a controller board built in the LCC
Jam processing
Can be done by moving the unit to the right or drawing out the tray.
Off-center adjustment
±3 mm (can be adjusted by moving the front and rear regulation plates).
Vertical tray movement time
Up: within 15 seconds (with no paper loaded; from tray insertion to "empty" detection).
Down: within 5 seconds
Down: within 5 seconds
Power consumption
(except for the heater)
(except for the heater)
Max. 26.4W
Lift-up: Max. 40.8W
Lift-up: Max. 40.8W
Power supply
5V
± 5% and 24V ± 5% (Supplied from the main unit)
Outside dimensions (W x D x H)
370 x 550 x 520 (mm), 14 9/16 x 21 21/32 x 20 15/32 (inch)
Occupying area (W x D)
370 x 550 (mm) (Clearance from the main unit: 235 mm), 14 9/16 x 21 21/32 (inch) (Clearance from the main unit: 9 1/4 inch)
Weight
Approx. 30 kg (66.1 lbs)
Paper feed system
Paper pick-up with the aid of a take-up roller; torque limiter reverse rotation separation system
Heater
Service parts (kit): When installing, refer to [11].
Installation/maintenance
Installed by service personnel
Optional detection
Auto detection supported
Packaged items
Parts for mounting, installation cautionary note
Display