Read Sharp MX-LC16 Service Manual online
MX-LC16 MAINTENANCE 3 – 4
C. Lift drive unit
1)
Check that there is no paper and lower the paper feed table to
the lower limit with the main unit simulation mode.
the lower limit with the main unit simulation mode.
2)
Remove the screws and the rear cabinet.
3)
Disconnect the connectors.
4)
Remove the screws and the lift drive unit.
3. Disassembly and assembly in each
unit
A. Paper feed unit
(1)
Pickup roller, paper feed roller, separation roller
1)
Pull the lever and open the upper cover remove the screw and
the sheet.
the sheet.
2)
Remove the pawl, pickup roller and the pickup roller and the
paper feed roller.
paper feed roller.
3)
Loosen the screw and remove the paper guide block.
4)
Remove the pawl and the separation roller.
ĭ
Į
Ĭ
Click on the first or last page to see other MX-LC16 service manuals if exist.