MX-LC15. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 2

MX-LC15  SPECIFICATIONS  1 – 1

MX-LC15

Service Manual

 

Type

Externally mounted 3500-sheet paper feeder

Transport reference

Center reference

Paper size

A4, 8.5" x 11"

Paper size setting

Service engineer support/simulation setup

Factory default paper size setting

AB series: A4
Inch series: 8.5" x 11"

Paper type setting

Provided

Supported paper types/weight

Plain paper, printed paper, recycled paper, letter head, pre-punched paper, color paper, Heavy paper(106-220g/m

2

 (28 lbs 

bond to 80lbs cover)   ・60-220g/m

2

 (21 lbs bond to 80 lbs cover)

Paper capacity

3500 sheets (80 g/m

2

 (21 lbs)), at effective height of 385 mm

Paper level detection

The paper feeder detects the amount of remaining paper and indicates one of seven levels (100%, 83.3%, 66.7%, 50.0%, 
33.3%, 16.7%, and none) on its own panel or on the printer's display. 

Paper refill method

Front loading type; paper can be refilled from the upper part.

Drive mechanism

Transport motor (brushless DC motor) controlled by a controller board built in the LCC

Jam processing

Can be done by moving the unit to the right or drawing out the tray. 

Off-center adjustment

3 mm (can be adjusted by moving the front and rear regulation plates).

Vertical tray movement time

Up: within 15 seconds (with no paper loaded; from tray insertion to "empty" detection).
Down: within 5 seconds

Power consumption
(except for the heater)

Max. 25.3W
Lift-up: Max. 40.8W

Power supply

5V 

 5% and 24V  5% (Supplied from the main unit)

Outside dimensions (W x D x H)

371 x 575 x 520 (mm), 14.6 x 22.6 x 20.5 (inch)

Weight

Approx. 29.2 kg (64.4 lbs)

Paper feed system

Paper pick-up with the aid of a take-up roller; torque limiter reverse rotation separation system

Heater

Service parts (kit)

Installation/maintenance

Installed by service personnel

Optional detection

Auto detection supported

Packaged items

Parts for mounting