Read Sharp MX-LC13 (serv.man27) Technical Bulletin online
MX-M1204 MX-LC13 (LARGE CAPACITY TRAYS) 8 – 3
7) Underlay the adjustment bolt with the adjuster. (Four positions)
8) Screw the adjustment bolt to adjust the height of MX-LC13.
There is a mark on the mounting plate of the large capacity 2-
stage paper feed tray. Adjust so that the top of the connection
plate in the machine side is aligned with the center of the mark.
stage paper feed tray. Adjust so that the top of the connection
plate in the machine side is aligned with the center of the mark.
9) Fix the positioning plate and with the screws (Packed items
No. 4 S-tight, M4 x 8).
10) Open the front cabinet and fix the lower cabinet with the screw.
NOTE: Note for separation
When separating, tighten the screw to release the
lock.
When connecting again, loosen the screw after con-
nection.
lock.
When connecting again, loosen the screw after con-
nection.
11) Connect the connector from MX-LC13 to the machine and
tighten the screw.
NOTE: Use an L-shape screwdriver.
12) Adjust the clearance of the exterior cabinet evenly.
See drawing below.
Front side
Front side
[F side]
[R side]
Click on the first or last page to see other MX-LC13 (serv.man27) service manuals if exist.