MX-LC13 (serv.man27). IMPROVEMENTS FOR INSTALLING MX-LC13 N - Sharp Copying Equipment Technical Bulletin (repair manual). Page 13

MX-M1204  MX-LC13 (LARGE CAPACITY TRAYS)  8 – 11

4) Joint the LCT connecting plates (F/R) fixed to MX-LC13 and

the connecting plates (F/R) fixed to the main unit.

When separating, tighten the screw to release the
lock.
When connecting again, loosen the screw after con-
nection.

5) Ensure even clearance of the upper section by pushing the

MX-LC13.

6)

Connect the connector from MX-LC13 to the machine and
tighten the screw.

NOTE: Use an L-shape screwdriver.

1)

Install the MX-RB17.

2)

Attach the LCT connecting plate to the large capacity trays
with the screws (Packed items No. 4 S-tight, M4 x 8).
MEMO: The reference label is attached to the plate. Attach it
so that the label can be seen from the outside.

3)

Attach the connection plates (F/R) to the first-series MX-LC13
with the screws (Packed items No. 4 S-tight, M4 x 8).

TopPage

: ‘14/Jan