Read Sharp MX-GB50A (serv.man2) Service Manual online
Sharp SmartPunch Pro Installation Manual
8
6. Leveling & Height Adjustment
6.1 Height Setting
No height adjustment of the SmartPunch Pro is required, for an installation site with a level floor. If the
floor is uneven then it is recommended to set the level of the SmartPunch Pro using the downstream
device as a reference.
6.2 Adjusting the Casters
floor is uneven then it is recommended to set the level of the SmartPunch Pro using the downstream
device as a reference.
6.2 Adjusting the Casters
a)
Using a 9/16” (15mm) open ended wrench, loosen
the jam nut(s) situated on the caster stud inside of
the machine
the jam nut(s) situated on the caster stud inside of
the machine
.
b)
Using the 9/16” (15mm) wrench, rotate the caster
stems to change the height.
Re-tighten the jam nuts once the correct height is
achieved.
stems to change the height.
Re-tighten the jam nuts once the correct height is
achieved.
Click on the first or last page to see other MX-GB50A (serv.man2) service manuals if exist.