MX-FXX2 (serv.man2). MX-FXX2 Service Manual (Complete) - Sharp Copying Equipment Service Manual (repair manual). Page 5

Read Sharp MX-FXX2 (serv.man2) Service Manual online

MX-FXX2  SPECIFICATIONS  2 – 3
(6) Reception function 
*1: This function saves all received data in memory and starts out
put after password entry. (Confidential reception is excluded.) 
Setting only on the reciver side.
(7) Report/list function
(8) Other Functions
* This function means that e-mail address setteing on F code relay
broadcast allowed.
Quick online transmission
Yes
Direct transmission
Yes
(Switching: Memory transmission 
 
Direct transmission)
Automatically-reduced 
transmission
Yes
Rotated transmission
Yes
Scaled transmission
Yes
Enlargement/reduction is allowed 
only from a fixed size to another. 
Reduction may be done on the 
receiver side with Fax/Internet Fax 
sending.
Recall mode
Error
Yes 
Busy
Yes
Number/time to be set up through 
system setup
Long original transmission
Yes
Maximum of 1000mm (single side 
only/black-white 2 values only)
Confidential transmission (Sharp 
mode)
No
Relay broadcast transmission 
(Sharp mode)
No
Large capacity original mode
Yes
Scanning of thin paper
Yes
Mixed originals feeder
Yes (Random + MIX)
Default date sender transmission
Yes (ON only)
Preview
No
Side erase
Yes
FAX
Automatic reception
Yes
Manual reception
No
Switching from manual reception to 
automatic reception. (Allowed only 
for SEF and Japan)
Memory reception
Yes
Fixed size reduced reception
Yes
Specified size scaled reception
No
Rotated reception
Yes
Setting of received data print 
condition
Equal size print (partition not 
allowed)
Equal size print (partition allowed)
Equal or reduced size print
2-sided reception
Condition setting through system 
setting
2-in-1 reception
No
Automatic reduction setting upon 
receiving A3
Yes
Automatic reduction setting upon 
receiving letter 
Yes
Reception from a specific number 
not allowed, or allowed. 
(Allow/Reject)
Specified numbers only (50 numbers 
/20 digits)
External phone connection 
remote
Yes
Confidential reception (Sharp 
mode)
No
Received data bypass output
Yes
Index printing
No
Transfer function upon disabling 
of output.
Yes (1 receiver (of transfer) 
registration)
Internet Fax/Fax to e-mail 
(Transfer of Internet Fax/Fax 
reception data to e-mail, inbound 
routing)
Yes
Exit tray setting
Yes
Insertion of job separator sheet
No
Staple function of received data
Yes
Auto wake up print
Yes
Received data print hold *1
Yes
FAX
Color toner print when black toner 
runs out.
No
FAX
Image sending activity report
Yes
Time-specified output 
Output with memory full 
* Maximum of 200 times including 
both transmission and reception
Transaction report
Yes
Address/phone number table
Yes
Group table
Yes
Program table
Yes
Memory box table (F code)
Yes
Communication original contents 
print
Always print/Upon error/no print 
List of allowed or rejected 
reception numbers
Yes
Table of control record for each 
account
No
FAX
Time specification
Yes
Polling reception
Yes
Bulletin board transmission
Yes 
Up to 100 registrations allowed with 
bulletin board, confidential and relay 
broadcast all combined. (Free area : 
1 registration)
Setting of the number of 
transmission: 1/no limit.
Cover sheet function
No
Transmission message
No
Sender print
Yes
Sender selection
Yes
Page number print
Yes
Date print
Yes (Date can be expressed 
alternatively)
Polling protection function
Yes
Page partition transmission
Yes
Page connection
No
Confidential (receiver unit)
Yes (F code method) 
Relay broadcast instructions
Yes (F code method) 
Fax to e-mail (F code) *
Yes
Edge erase
Yes
Center erase
Yes
2 in 1
Yes
Card shot
Yes (Equivalent or enlargement up to 
the paper width. The maximum 
enlargement is not allowed to exceed 
400%) 
Forward data transmission/
reception (Document Admin)
Yes
Data transmission by PC-Fax/PC-
Internet Fax is allowed, too.
FAX
Page of 80
Display

Click on the first or last page to see other MX-FXX2 (serv.man2) service manuals if exist.