Read Sharp MX-FX10 Service Manual online
MX-FX10 EXTERNAL VIEWS AND INTERNAL STRUCTURES 3-2
NOTE
• When the auto power shut-off function is activated, All lights except the mode key lights go off. For the information on the auto power shut-off function.
• When the auto power shut-off function is activated, All lights except the mode key lights go off. For the information on the auto power shut-off function.
5 Display
This key displays the base screen and the function setting screen.
6 [BACK] key
In a setting or programming screen, this key is used to move back to the previous screen.
7 [OK] key
This key is used to enter a setting that has been selected with the arrow or other keys (
).
8 Numeric keys
These are used to enter fax numbers, sub-addresses, passcodes, and numerical settings.
9 [C] key
This is used to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings.
One digit is cleared each time the key is pressed.
When an original is being scanned, this key can also be used to cancel scanning.
One digit is cleared each time the key is pressed.
When an original is being scanned, this key can also be used to cancel scanning.
16 [RESOLUTION] key
This key is used to select resolution and exposure settings.
17 [ADDRESS] key
This key is used to search for a fax destination that has been stored as an auto-dial number in the address book.
18 [BROADCAST] key
This is used to perform a broadcast transmission.
19 [ORIGINAL SIZE] key
This is used to set the size of the original to be faxed.
20 [DUPLEX SCAN] key
Press this key to use the duplex scan function.
21 Arrow keys (
)
These are used to select items and move through pages.
22 [CA] key
This is used to cancel a transmission or programming operation. When pressed during an operation, the
operation is canceled and the display returns to the base screen.
This key is also used to cancel a resolution, paper size, or special function setting that was selected when sending
a fax.
operation is canceled and the display returns to the base screen.
This key is also used to cancel a resolution, paper size, or special function setting that was selected when sending
a fax.
23 [START] key (
)
This is used at the following times:
1. When starting transmission
1. When starting transmission
2. When scanning an original
3. When starting manual reception/
4. When configuring and storing settings
5. When returning from the auto shutoff mode
5. When returning from the auto shutoff mode
ABC
DEF
JKL
GHI
MNO
TUV
PQRS
WXYZ
@.-_
READ-END
ACC. #-C
BACK
OK
INTERRUPT
ZOOM
ADDRESS
ADDRESS
ADDRESS
DUPLEX SCAN
DUPLEX SCAN
DUPLEX SCAN
DUPLEX
PAPER
RESOLUTION
RESOLUTION
RESOLUTION
AUTO%
FORMAT
FORMAT
BROADCAST
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
ORIGINAL SIZE
5
6
7
8
16
17
18
19
20
21
23
22
9
Click on the first or last page to see other MX-FX10 service manuals if exist.