Read Sharp MX-FRX2U (serv.man2) Technical Bulletin online
Description
No. Subject
Description
1 Image
send-related
Minimum scanning area of irregular size for image sending has been modified.
Destination (AB type): [Before change] 64mm
[After change] 50mm
Destination (Inch type): [Before change] 64mm
[After change] 50mm
2 Additional
function
[Prohibiting blank printing] mode has been added to the following:
[System setting (Administrator login)]
[Prohibition setting]
[Printer environment
setting]
3 Printer-related
Printing a web screen in fast mode and in colors on the standard browser (Safari) of
MacOSX (10.4.7) may result in printing of unusual tones (excessively dense). This error
has been corrected.
MacOSX (10.4.7) may result in printing of unusual tones (excessively dense). This error
has been corrected.
4 Printer-related
When PDF file having specific type of image (overlapping images) is printed, it may result
in an error of printing overlapping background that does not appear on screen. This error
has been corrected.
in an error of printing overlapping background that does not appear on screen. This error
has been corrected.
5 Printer-related
Printing a data file having large capacity on AutoCAD required excessive amount of time.
Printing speed has been improved.
Printing speed has been improved.
6 Printer-related
When “Time of maintenance” is displayed, a MIB value on FMP is “hrDeviceStatus =
Down, hrPrinterStatus = other” (According to specifications). If the Standard TCP/IP port
on Windows receives the MIB value, the spooler may be placed under “offline” status and
sending print data may be disabled. Against this error, Valid/Invalid setting of
maintenance notice by MIB has been added to controller software SW.
Down, hrPrinterStatus = other” (According to specifications). If the Standard TCP/IP port
on Windows receives the MIB value, the spooler may be placed under “offline” status and
sending print data may be disabled. Against this error, Valid/Invalid setting of
maintenance notice by MIB has been added to controller software SW.
Controller software SW (Sim55-3)
SW. No.9 DATA:5
0: Valid (default value) You cannot print because “Time of maintenance” is informed.
1: Invalid You can print because “Time of maintenance” is not informed.
1: Invalid You can print because “Time of maintenance” is not informed.
7 Printer-related
Printing on MacOS10.3.9 and Illustrator 10 may result in PS error or garbled characters.
This error has been corrected.
This error has been corrected.
8
Image quality
adjustment-related
adjustment-related
Currently, if a request of process control is issued during copy operation, a process
control does not start until completion of a job or until feeding 100 sheets. Further, if two
or more reserved jobs including printing jobs exist, the reserved jobs are connected and
the number of process control actions has been reduced.
control does not start until completion of a job or until feeding 100 sheets. Further, if two
or more reserved jobs including printing jobs exist, the reserved jobs are connected and
the number of process control actions has been reduced.
9
Fixing motor control-
related
related
If shut-off status continues for a long time, a miniscule rotation is provided to upper and
lower fixing rollers at a timing of date changes (0:00) to prevent deformation (flat spot)
of pressing part. This control has been added.
lower fixing rollers at a timing of date changes (0:00) to prevent deformation (flat spot)
of pressing part. This control has been added.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE523
Click on the first or last page to see other MX-FRX2U (serv.man2) service manuals if exist.