Read Sharp MX-FR37U (serv.man10) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
1/3
TECHNICAL BULLETIN
Date:
24
th
August 2012
Model:
MX-FR37U
Ref.:
DCE865
Colour:
White
Page:
1 of 3
ROM UPGRADE ..... (1).
1. Model Name:
MX-FR37U (Option for MX-M264N/M314N/M354N)
2. Description:
Upgrade of ICU-ROM
From June 2012 production
Packing label
ICU
B00 0200cc
* ICU above is the version described in the ROM management label. Check that the actual
version is: ICU(MAIN): 02.00.c1/ICU(BOOT): 01.00.c1/ICU(SUB): 01.02.c1/LANGUAGE:
01.05.c1/GRAPHIC: 01.01.c1 by SIM22-5.
version is: ICU(MAIN): 02.00.c1/ICU(BOOT): 01.00.c1/ICU(SUB): 01.02.c1/LANGUAGE:
01.05.c1/GRAPHIC: 01.01.c1 by SIM22-5.
Item of change: See the attached sheet.
Note) This report is a T/R for the Data Security Kit Option, corresponding to the general T/R No.
DCE-864.
DCE-864.
Sharp Electronics (UK) Ltd., Document Systems Support
2/3
[Description]
No. Item
Details
1
Sharp Desk Mobile
Modification has been made not to display the registration confirmation message on the
operation panel of the main unit when registering the profile with Scan function of Sharp
Desk Mobile.
operation panel of the main unit when registering the profile with Scan function of Sharp
Desk Mobile.
2 UI
The feature to change the color of 2-line message from Gradation pattern to Single color
pattern has been added to the controller SOFT SW.
SIM55-3 SW No. 30 Data 1
0: Gradation pattern (Default)
1. Single color pattern
pattern has been added to the controller SOFT SW.
SIM55-3 SW No. 30 Data 1
0: Gradation pattern (Default)
1. Single color pattern
3 UI
If the paper types/paper sizes that could not be output as the offset was selected when
setting up the Offset, it used to be that "The paper in the selected tray cannot be used for
the selected mode" message would be displayed and the resume print was blocked as a
specification. Now it has been modified to clear the offset processing automatically
when executing the job. (no message is displayed)
setting up the Offset, it used to be that "The paper in the selected tray cannot be used for
the selected mode" message would be displayed and the resume print was blocked as a
specification. Now it has been modified to clear the offset processing automatically
when executing the job. (no message is displayed)
4 UI
When the OSA external authentication log-in screen was displayed on Copy/Image Send
mode, the job status on the lower left of the screen could not be displayed. This
problem has been corrected.
mode, the job status on the lower left of the screen could not be displayed. This
problem has been corrected.
5 Web
Page
When the "Sys Log" in the Service Web Page was set to "Enable", in some cases, the
U2 error was caused by the execution of Reboot from the Web Page. This problem has
been corrected.
U2 error was caused by the execution of Reboot from the Web Page. This problem has
been corrected.
6 Image
Send
When scanning to the USB memory, in some cases, it would fail with "The memory
becomes full." message even though there was free space in the USB memory.
This problem has been corrected.
becomes full." message even though there was free space in the USB memory.
This problem has been corrected.
7 Trouble
Code
The U2 trouble that should not have been cleared unless SIM16 was executed could be
cleared by the power-OFF/ON. This problem has been corrected.
(If the corrective firmware for this issue is installed to the machine that U2 trouble was
cleared only by the power-OFF/ON, the U2 trouble will be displayed when the machine is
turned ON after the completion of the installation so the appropriate process to clear the
U2 trouble will be required.)
cleared by the power-OFF/ON. This problem has been corrected.
(If the corrective firmware for this issue is installed to the machine that U2 trouble was
cleared only by the power-OFF/ON, the U2 trouble will be displayed when the machine is
turned ON after the completion of the installation so the appropriate process to clear the
U2 trouble will be required.)
8 Network
When using "Scan to Network Folder", if the Network Folder was specified not with the IP
address but with the server name (15 characters for the hostname), in some cases, the
machine hanged up and could not send the data. This problem has been corrected.
address but with the server name (15 characters for the hostname), in some cases, the
machine hanged up and could not send the data. This problem has been corrected.
9 Network
There were some cases where Scan to E-Mail failed under the network environment that
a large amount of ARP packets were running. This problem has been corrected.
a large amount of ARP packets were running. This problem has been corrected.
10 Network
When scanning with OSA, if the application server was Microsoft-IIS/Ver.7.0 or later
version, the communication error occurred during the data sending by HTTP. This
problem has been corrected.
version, the communication error occurred during the data sending by HTTP. This
problem has been corrected.
11 Network
Modification has been made not to finalize the IP address until the IP information is
obtained from DHCP server when the setting of DHCP is enabled.
obtained from DHCP server when the setting of DHCP is enabled.
12 Network
When accessing to the file server with the sever name, in some cases, Scan to Network
Folder would be unusable. This problem has been corrected.
Folder would be unusable. This problem has been corrected.
13 Network
When printing from the machine with the Printer Expansion Kit installed, in some rare
cases, NIC on the machine side would be disconnected and the data would not be
printed. This problem has been corrected.
cases, NIC on the machine side would be disconnected and the data would not be
printed. This problem has been corrected.
14 Printer
The feature to set the printable area to the same level as the previous models has been
added to the controller SOFT SW.
SIM55-3 SW No. 27 Data 7
0: MX-2310 series/2610 series/3610 series/4110 series/5110 series Spec (Default)
1: MX-2600 series/3100 series/4100 series/5001 series Spec
added to the controller SOFT SW.
SIM55-3 SW No. 27 Data 7
0: MX-2310 series/2610 series/3610 series/4110 series/5110 series Spec (Default)
1: MX-2600 series/3100 series/4100 series/5001 series Spec
15 Machine
Control
If the optional Paper Drawer (MX-DE18) was installed once and it was removed
afterward, the "Tray3" which should have not existed was displayed on the operation
panel. This problem has been corrected.
afterward, the "Tray3" which should have not existed was displayed on the operation
panel. This problem has been corrected.
Sharp Electronics (UK) Ltd., Document Systems Support
3/3
No. Item
Details
16 Other
At the timing of sending the Alert Mail of E-mail RIC, the mode to prevent more than one
Alert Mails of the same event from being sent out when warming up from the Energy
Save has been added to the controller SOFT SW.
SIM55-3 SW No. 28 Data 3
0: Allowed: Current operation (Default)
1: Not Allowed
Alert Mails of the same event from being sent out when warming up from the Energy
Save has been added to the controller SOFT SW.
SIM55-3 SW No. 28 Data 3
0: Allowed: Current operation (Default)
1: Not Allowed
17 Other
Modification has been made to change the frequency to obtain the information of the
remaining toner using MIB with SOFT SW.
SIM55-3 SW No. 32 Data 2
0: every 25% (Default)
1: every 5%
remaining toner using MIB with SOFT SW.
SIM55-3 SW No. 32 Data 2
0: every 25% (Default)
1: every 5%
