Read Sharp MX-FR11U (serv.man4) Technical Bulletin online
5) After completion of reading, installation (update) of
the firmware is prossed.
Firm Update IcuM
Writing Data
Writing Data
*The code name of the firmware which is currently
installed(updated) is displayed sequentially on the
right upper corner.
right upper corner.
*The display may flash at a moment during installing
(update) procedures. This is a normal operation.
6) Check the result of installation (update) of the
firmware. By using [UP] key and [DOWN] key. the
results of installation (update) of all the firmware files.
results of installation (update) of all the firmware files.
Firm Update IcuM
Result: OK
Result: OK
Firm Update IcuM
Result: Not Update
Result: Not Update
Firm Update IcuM
Result: NG
Result: NG
・OK:Update is successfully completed.
・NG:Update is failed.
・Not Update:Update itself is not executed
・NG:Update is failed.
・Not Update:Update itself is not executed
Reason why update is not executed is no option
device for the target firmware is not installed
device for the target firmware is not installed
7) Turn OFF the power to terminate the boot mode.
8) Turn ON the power, and enter the DSK product key.
8) Turn ON the power, and enter the DSK product key.
Then turn OFF/ON the power to boot the machine
as a DSK-installed machine.
as a DSK-installed machine.
G. Specifying settings of data security function.
1) If files have been saved by the document filing
function (including automatic temporary storage
function) before installing the data security kit, be sure
to execute [Delete all areas] after installing the kit.
function) before installing the data security kit, be sure
to execute [Delete all areas] after installing the kit.
2) Return the storage data of backup operation to
the memory on the unit (including HDD).
3) With cooperation from a machine administrator of the
installation site for entry of administrator password and
setting, enter a product key and specify initial setting, in
accordance with the provided operating manual and
Precautions (
setting, enter a product key and specify initial setting, in
accordance with the provided operating manual and
Precautions (
“Precautions” for MX-FR11 only).
H. Affix the provided “Common criteria” certificate
label onto the front of the main unit. (MX-FR11 only)
label onto the front of the main unit. (MX-FR11 only)
Affix
“Common criteria” certificate label onto the location
shown in the figure below, on the front of main unit.
4/4
Common Criteria
Validated
MFP Data Security Kit
Validated
MFP Data Security Kit