Read Sharp MX-FNX8 Service Manual online
MX-FNX8 DETAILS 4 – 12
7. BOOKLET STAPLING
A. BOOKLET PRESSURE MECHANISM
[A] Booklet Pressure Roller Solenoid
[B] Booklet Pressure Roller Arm
[C] Booklet Pressure Roller
As soon as the edges are aligned by the positioning roller and the
jogger fences, the stack feed out belt moves.
In booklet mode, immediately after the edges are aligned by the
positioning roller and jogger fences, the booklet pressure solenoid
switches on and the booklet pressure roller presses down on the
stack until booklet stapling is finished. This prevents the stack from
shifting during stapling.
[B] Booklet Pressure Roller Arm
[C] Booklet Pressure Roller
As soon as the edges are aligned by the positioning roller and the
jogger fences, the stack feed out belt moves.
In booklet mode, immediately after the edges are aligned by the
positioning roller and jogger fences, the booklet pressure solenoid
switches on and the booklet pressure roller presses down on the
stack until booklet stapling is finished. This prevents the stack from
shifting during stapling.
B. BOOKLET STAPLING AND FOLDING
(1) Overview
1
The last sheet of the stack [1] enters the stapling tray. The jogger
fences [2] jog the last sheet into position (based on the width of the
selected paper size) and then retract and stop 1 mm away from the
sides of the stack.
2
The pressure plate [3] and booklet pressure roller [4] press down
on the sheet. The stack feed out belt switches on and the pawl [5]
on the feed out belt catches the bottom of the stack and raises it.
The stapling tray sensor [6] detects the trailing edge of the paper
stack.
3
The feed out belt [7] raises the stack to the prescribed stapling
position and stops. The jogger fences move to the sides of the
stack and the booklet staplers [8] staple the stack.
The last sheet of the stack [1] enters the stapling tray. The jogger
fences [2] jog the last sheet into position (based on the width of the
selected paper size) and then retract and stop 1 mm away from the
sides of the stack.
2
The pressure plate [3] and booklet pressure roller [4] press down
on the sheet. The stack feed out belt switches on and the pawl [5]
on the feed out belt catches the bottom of the stack and raises it.
The stapling tray sensor [6] detects the trailing edge of the paper
stack.
3
The feed out belt [7] raises the stack to the prescribed stapling
position and stops. The jogger fences move to the sides of the
stack and the booklet staplers [8] staple the stack.
[A]
[B]
[C]
10
11
12
13
14
15
16
17
18
2
3
4
5
6
7
8
9
19
20
21
1
22
23
1
Leading Edge Pressure Roller
2
Stack Present Sensor
3
Feed Out Belt Pawl 1
4
Booklet Staplers x2
5
Stack Feed Out Belt HP Sensor
6
Feed Out Belt Pawl 2
7
Positioning Roller
8
Jogger Fences x2
9
Stack Exit Roller
10
Pressure Plate
11
Stapling Tray Bottom Fence
12
Corner Stapler
13
Stapling Tray Paper Sensor
14
Feed Out Belt
15
Fold Unit Bottom Fence
16
Fold Bottom Fence HP Sensor
17
Fold Unit Entrance Sensor
18
Fold Unit Exit Rollers x2
19
Fold Unit Exit Sensor
20
Fold Rollers x2
21
Clamp Rollers x2
22
Stack Junction Gate
23
Stack Transport Roller
1
2
3
2
1
3
4
5
6
7
8
Click on the first or last page to see other MX-FNX8 service manuals if exist.