Read Sharp MX-FNX5 (serv.man3) Service Manual online
MX-FNX5 REPLACEMENT AND ADJUSTMENT 3 – 2
F. JOGGER UNIT COVER
1)
Open the front door.
2)
Pull out the stapler tray unit [A].
3)
Remove the jogger unit cover [B] ( x2)
2. ROLLERS
A. DRAG ROLLER
1)
Above the shift tray, pull the roller mount [A] out.
2)
Remove the rollers [B] and [C] (
x 1 each)
B. POSITIONING ROLLER
1)
Remove the jogger unit cover (
1. COVERS -F.)
2)
Remove the snap ring [A].
3)
Release the rubber belt [B].
4)
Replace the positioning roller [C].
C. ALIGNMENT BRUSH ROLLER
1)
Open the front door and pull out the staple unit.
2)
Remove the rear cover.
3)
Remove the main board bracket and all connectors ( x 8).
(
(
4. SENSORS -F.)
4)
Remove the screw [A] and tension spring [B] for the tension
bracket [C], and release the tension of the timing belt.
bracket [C], and release the tension of the timing belt.
5)
Remove the pulley [D] and bearing [E].
6)
Remove the inner cover [F] ( x 1).
7)
Open the guide [G], then remove the alignment brush roller
assembly [H].
assembly [H].
8)
Remove the alignment brush roller [I] (
x2, Bearing x 1
front/back, x1).
(1)
[A]
[B]
[A]
[B]
[C]
[A]
[B]
[C]
[A]
[B]
[C]
[D]
[E]
Click on the first or last page to see other MX-FNX5 (serv.man3) service manuals if exist.