MX-FNX3, MX-FNX4. MXFNX3 and MXFNX4 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 3

MX-FNX4  PRODUCT OUTLINE  1 – 1

MX-FNX4

Service Manual

 

This machine, a posttreatment device for paper used for copy or fax machines, can be used with the host machine shown below. It features the
offset system that allows feeding of output sheet to the finisher or saddle finisher by the paper pass unit (MX-RBX2) and offset delivery of paper
for every set of job.
1) Three types of auto-stapling: Three types of stapling positions are available. (One-point stapling in the front, one-point stapling at the back,

two-point stapling at the center)

2) Saddle stitch system (applicable to the MX-FNX4 only): Maximally 15 sheets of paper can be delivered after stapling at the center and fold-

ing in two.

3) Punch system (optional): With the punch module installed, paper can be punched for a binder before delivery (applicable to paper of

weight ranged from 55 to 256 g/m

2

, but inapplicable to OHP film).

Staple cartridges are required for the finisher as a consumable.
(Staple cartridge [Approx. 5000 pcs. x 3 sets] AR-SC2)
(Staple cartridge for saddle stitcher [Approx. 5000 pcs. x 3 sets] AR-SC3)

Applicable model

MX-5500N/6200N/7200N

MX-FNX4