Read Sharp MX-FNX3 / MX-FNX4 (serv.man10) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-1153
1. Model Name: MX-FNX3 - FNX4 (Option for MX-5500N/6200N/6201N/7000N/7001N)
2. Description: Upgrade of Finisher ROM
From April 2013 production
Model Name
ROM control No.
Version
MX-FNX3
A14
0106D0
MX-FNX4
A16
Item of change:
1. When performing 2 Staples, in some cases, one position on the front side could not be stapled
depending on the stop state of the alignment plate. This problem has been corrected.
Note: In accordance with the ROM version upgrade, the parts code of the Finisher PWB has
been changed. But the Finisher PWB before the change can be used by upgrading with
the ROM so it is not necessary to replace the Finisher PWB with the one after the change.
the ROM so it is not necessary to replace the Finisher PWB with the one after the change.
3. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank Q'ty
Parts name
Effective
time
Inter-
chang
e-
ability
Parts code
Parts code
1 MX-FNX3
MX-FNX4
ALL
7-106 0CW4146K52010 0CW4146K52011 CM
1
FINISHER PWB U
2013/4
3
<Interchange>
1. Interchangeable.
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
ROM Version History Table
No.
ROM control No.
Version
Action
T/R No
(3)
A03
0104D0
2007/6
CCE-471
(2)
A02
0103D0
2007/2
CCE-430
(1)
A01
0102D0
2006/7
CCE-343
ROM UPGRADE ..... (4).
TECHNICAL BULLETIN
Date:
28
th
May 2013
Model:
MXFNX3 – MXFNX4
Ref.:
CCE-1153
Colour:
White
Page:
1 of 1
Display