Read Sharp MX-FNX10 (serv.man37) Technical Bulletin online
ROM UPGRADE (2)
From March 2009 production
ROM control No.
Version No.
A32 010202
Item of change: See the accompanying sheet.
* Part code of control board has been changed along with the ROM upgrade. However, modification
can be made by upgrading the existing control board. Therefore, it is not necessary to replace
the control board.
the control board.
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty Parts
name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1 MX-FN10 ALL 21-19 0CW4170K602J/ 0CW4170K602K/ DA 1
CONTROL PWB UNIT
2009/3 3
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
ROM Version Combination History Table
No. ROM
administration
Version No.
Action
Issued T/R No.
(1) A01
010102
2008/10
Mid
Bulletin Ref 002 (CCE-
605R)
[Upgrade of ROM (3) Description (Ver. 01.03.02)]
No. Items
Detail
1
Modification of problem
When main unit cover is opened and closed while staple unit is
moving toward replacing position, slide motor trouble (F1-08) is
shown. Modification is made to fix this problem.
moving toward replacing position, slide motor trouble (F1-08) is
shown. Modification is made to fix this problem.
[Upgrade of ROM (2) Description (Ver. 01.02.02)]
No. Items
Detail
1
Modification of problem
dephasing of gripper in Bulletin Ref 003 or repair strategy.
2
Modification of problem
Deviation in paper folding position is seen during saddle stitching
depends on the print volume. Modification is made to fix this
problem.
depends on the print volume. Modification is made to fix this
problem.
3
Modification of problem
Bad alignment when printing on large size paper is fixed.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-671
Display