Read Sharp MX-FN30 / MX-FN31 (serv.man7) Technical Bulletin online
Technical Report
DIGITAL FULL COLOR COPIER (OPTION): MX-FN30/FN31
No. : CCE-1798
Date: Aug. 30, 2017
この資料に掲載されている表示価格は消税抜きです。
SHARP CORPORATION
Office Solutions Business Unit
C
CHANGE OF PARTS FOR FINISHER
1. Model Name:
MX-FN30/FN31 (Option for MX-3050N/3550N/4050N/5050N/6050N
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N)
2. Description:
Following changes have been made for productivity improvement:
(1) Sponge mounted to the stapler base plate sheet has been disused.(SHEET, PLATE,
STAPLER, BASE)
(2) The plate thickness of the rear panel sub has been changed. (PANEL, REAR, SUB)
(3) Design of the buffer motor bracket has been changed and the screw has been
added. (BKT, DRV, MOT, BAF) *Please change the parts at the same time as (2).
(4) The plate thickness of the flapper drive caulking has been changed from 0.6mm to
1.0mm (CAULKING, FLAP, DRIVE)
(5) Along with the change of (4), the clutch bracket caulking can no longer be mounted.
This parts will not be supplied as the service parts.(BKT, TM, CL)
(6) The plate thickness of the tray drive torque limiter caulking has been changed from
0.6mm to 1.0mm. (ASM, TRAY, TQL)
(7) Design of the tray drive motor fulcrum caulking has been changed, and the bushing
has been added. (CAULKING, BKT, MOT, TRAY) *Please change this at the
same time as (6).
(1) Stapler base plate (SHEET, PLATE, STAPLER, BASE)
Location: (Excerpt from Parts Guide 24 STAPLE MOUNT ASS’Y)
Sponge disused
(2) Change of the plate thickness of the rear panel sub (PANEL, REAR, SUB)
Location to be used:
MX-FN30 (Excerpt from Parts Guide 5 INTERNAL COMPONENTS 2)
MX-FN31 (Excerpt from Parts Guide 5 INTERNAL COMPONENTS 2)
Before change
After change
Rear panel sub
(PANEL, REAR, SUB)
(PANEL, REAR, SUB)
Plate thickness: 0.6mm
Plate thickness:1.0mm
Drawing processing
removed
Drawing processing
removed
Stapler base plate
(SHEET, PLATE,
STAPLER, BASE)
(SHEET, PLATE,
STAPLER, BASE)
(3), (4), (5) Location to be used/disused (Excerpt from Parts Guide 7 INTERNAL COMPONENTS 3)
(3) Design change of the buffer motor bracket (BKT, DRV, MOT, BAF)
Before change
After change
(4) Design change of the flapper drive caulking (CAULKING, FLAP, DRIVE)
Before change
After change
Screw hole added
(3) Buffer motor bracket
(BKT, DRV, MOT, BAF)
(BKT, DRV, MOT, BAF)
(4) Flapper drive caulking
(CAULKING, FLAP, DRIVE)
(CAULKING, FLAP, DRIVE)
(5) Clutch bracket caulking disused
(BKT, TM, CL)
(BKT, TM, CL)
Plate thickness: 0.6mm
Plate thickness: 1.0mm
Drawing processing removed
Drawing processing removed
(6), (7) Location to be used (Excerpt from Parts Guide 7 INTERNAL COMPONENTS 3)
(6) Tray drive torque limiter caulking (ASM, TRAY, TQL)
Before change
After change
(7) Tray drive motor fulcrum caulking (CAULKING, BKT, MOT, TRAY)
Before change
After change
BUSHING added
(6) Tray drive torque limiter caulking
(ASM, TRAY, TQL)
(ASM, TRAY, TQL)
(7) Tray drive motor fulcrum caulking
(CAULKING, BKT, MOT, TRAY)
(CAULKING, BKT, MOT, TRAY)
Bushing mounting hole added
Plate thickness: 0.6mm
Plate thickness: 1.0mm
Drawing processing
Drawing processing
Length of
boss changed
boss changed