Read Sharp MX-FN30 / MX-FN31 (serv.man5) Technical Bulletin online
Technical Report
: MX-FN30/FN31
No. : CCE-1818
Date: Oct. 16, 2017
この資料に掲載されている表示価格は消税抜きです。
SHARP CORPORATION
Office Solutions Business Unit
C
CHANGES IN FINISHER
1. Model Name:
MX-FN30/FN31 (Option for MX-3050N/3550N/4050N/5050N/6050N
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N)
2. Description:
(1) The plate thickness of "GUIDE, SADDLE, OUT UP" has been changed for
productivity improvement.
(2) The plate thickness of "STACKING, BRACKET, CLUTCH, BASE" has been
changed for productivity improvement.
(3) Face pressing processing has been added to "ASSEMBLY, SHEET, EDGE, TRAY,
SENSOR, BRACKET" and Edge protect mylar has been disused for productivity
improvement.
(4) The design of "GUIDE, ROLLER" has been changed and the sheet has been
added for the improvement of the accuracy of folding with 1-sheet.
(5) "ASSEMBLY, HINGE, COVER, LONG" and "PLATE, HINGE, COVER, LONG" have
no longer been supplied as the service parts for the improvement of the accuracy
when replacing in the field. Instead of it, only the parts assembled is supplied.
If "ASSEMBLY, HINGE, COVER, LONG" and/or "PLATE, HINGE, COVER, LONG" is
required to be replaced, please use HINGE COVER LONG AS.
(6) "ASM, CORNER, F, GUIDE" has no longer been supplied as the service parts for
the improvement of the accuracy when replacing in the field.
If "ASM, CORNER, F, GUIDE" is required to be replaced, please use PAPER FEED
Guide unit.
(1) GUIDE, SADDLE, OUT UP
Location (Parts Guide 27 SADDLE ASSEMBLY1)
Difference between the old and new:
Before change
After change
(2) STACKING, BRACKET, CLUTCH, BASE
Location (Parts Guide 18 PAPER FEED DISPOSE ASSEMBLY 2) Difference between the old and new:
Before change
After change
Plate thickness:
1.0 mm
Shape of drawing
changed
1.0 mm
Shape of drawing
changed
Plate thickness:
0.6mm
0.6mm
Plate thickness:
1.0 mm
Shape of drawing
changed
1.0 mm
Shape of drawing
changed
Plate thickness:
0.6mm
0.6mm
GUIDE, SADDLE, OUT UP
STACKING, BRACKET, CLUTCH, BASE
(3) ASSEMBLY, SHEET, EDGE, TRAY, SENSOR, BRACKET
Location (Parts Guide 8 INTERNAL COMPONENTS 4)
Difference between the old and new:
Before change
After change
(4) GUIDE, ROLLER
Location (Parts Guide 29 SADDLE ASSEMBLY3)
ASSEMBLY, SHEET, EDGE, TRAY, SENSOR, BRACKET
GUIDE, ROLLER
Mylar disused
*Changed to the concave shape
*Sheet added
*Sheet added
Convex shape added
Rib added
(5) Disuse of "ASSEMBLY, HINGE, COVER, LONG" and "PLATE, HINGE, COVER, LONG"
Location (Parts Guide 3 INTERNAL COMPONENTS 1)
(6) Disuse of "ASM, CORNER, F, GUIDE"
Location (Parts Guide 22 PAPER FEED GUIDE ASS'Y)
SHAFT, TRANSMISSION
HINGE COVER LONG AS
SCREW, TP (M3X6)
ASSEMBLY, HINGE, COVER, LONG
PLATE, HINGE, COVER, LONG
PAPER FEED Guide unit
SCREW, TP (M3X6)
ASM, CORNER, F, GUIDE