Read Sharp MX-FN30 / MX-FN31 (serv.man13) Technical Bulletin online
Sharp Electronics (UK) Ltd., Document Systems Support
Date:
30
th
Sept 2016
Model:
See below
Ref.:
CCE 1642
Colour:
White
Page:
1 of 4
TECHNICAL BULLETIN
CHANGE IN PARTS FOR 3K FINISHER
1. Model Name:
MX-FN30/FN31 (Option for MX-3050N/3550N/4050N/5050N/6050N
MX-3060N/3560N/4060N/3070N/3570N/4070N/5070N/6070N)
2. Description:
The parts for 3K Finisher have been changed as follows:
① Attachment of polyethylene sheets to the paper guide surface on Saddle Assembly.
The Saddle Assembly may get dirty depending on the type of coated paper.
② Attachment of discharge brush in the center of "ELIMINATOR, STATIC CHARGE"
Papers may be discharged out of alignment on rare occasions.
③ Change in the length of "SHEET, EXIT, SADDLE". This is to prevent the paper
being bent while multiple copies of single heavy paper are continuously discharged
using J Saddle tray.
④ Implementation of following measures to solve the failure to close the
opening-closing paper guide completely after clearing paper jam:
-
Increase in load on the spring attached to “PAPER FEED Guide unit”.
-
Addition of a “SPRING, TORSION” on rear side.
⑤
Change in shape of “MOUNT, TRAY” to enhance the strength for elevation of Paper
delivery tray.
⑥ Implementation of following measures to decrease noise from switching gate:
-
Attachment of a sponge to the “FLAPPER”
- Change in shape of a rib
⑦
Change in the shape of “GUIDE”, “BRACKET, STP, NS, UP” and “BRACKET, NS,
STAPLER, BASE” to stabilize the ability of bind staple-free staple
⑧
Removal of “COVER, MOTOR PCB” to improve productivity
⑨
Change in color of “LIMITTER, TORQUE” to improve productivity
①Saddle Assembly (0CW4M51157010)
Polyethylene sheets have
been attached.
been attached.
Sharp Electronics (UK) Ltd., Document Systems Support
②ELIMINATOR, STATIC CHARGE (0CWFL05056003)
Before
After
③
SHEET, EXIT, SADDLE (0CWFL124570//)
Before
After
④
PAPER FEED Guide unit (0CW4M51138006)
⑤MOUNT, TRAY (0CWFE37507007)
Before
After
Additional discharge brush
45 mm
77 mm
The load on this spring has been increased.
Additional SPRING, TORSION
(0CWFE37481005)
(0CWFE37481005)
Sharp Electronics (UK) Ltd., Document Systems Support
⑥FLAPPER (0CWFL124750//)
Before
After
⑦
GUIDE (0CWFL06984002)
BRACKET, STP, NS, UP
BRACKET, NS, STAPLER, BASE
(0CWFL06946003)
(0CWFL02076006)
⑧
COVER, MOTOR PCB (0CWFE387250//)
Before
After
Change in rib shape
Attachment of a sponge
These surfaces
have been cut
off.
have been cut
off.
Moving the position
of convex shape
of convex shape
Moving the
position of
these holes
position of
these holes
The shape has
been changed to
oval hole.
been changed to
oval hole.
The COVER, MOTOR PCB
has been removed.
has been removed.
Sharp Electronics (UK) Ltd., Document Systems Support
⑨LIMITTER, TORQUE (0CWFE39778002)
3. Action:
1.
From March 2016 production
2.
From mid-March 2016 production
3.
From April 2016 production
4.
From June 2016 production
5.
From July 2016 production
6.
From August 2016 production
7.
From September 2016 production
4. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty
Parts name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1
FN31
ALL
27-901 0CW4M511570//
0CW4M51157010
FB
1
SADDLE ASSEMBLY
2016/3
1
FN30/FN31
7-40
0CWFL050560//
0CWFL05056003
AX
1
ELIMINATOR, STATIC
CHARGE
CHARGE
1
2
FN31
27-121 0CWFL030960//
0CWFL124570//
AE
2
SHEET, EXIT,
SADDLE
SADDLE
2016/3
Mid
1
3
FN30/FN31
22-2
0CWFE374810//
0CWFE37481005
AE
2
SPRING, TORSION
2016/4
1
22-501 0CW4M511380//
0CW4M51138006
BP
1
PAPER FEED Guide
unit
unit
1
4
11-3
0CWFE375070//
0CWFE37507007
AD
2
MOUNT, TRAY
2016/6
1
23-2
0CWFE366460//
0CWFL124750//
AW
1
FLAPPER
1
5
25-4
0CWFL069840//
0CWFL06984002
AG
1
GUIDE
2016/7
5
25-9
0CWFL069460//
0CWFL06946003
BA
1
BRACKET, STP, NS,
UP
UP
5
25-15
0CWFL020760//
0CWFL02076006
BC
1
BRACKET, NS,
STAPLER, BASE
STAPLER, BASE
5
6
17-39
0CWFE387250//
-
-
-
COVER, MOTOR
PCB
PCB
2016/8
-
7
7-24
0CWFE397780//
0CWFE39778002
AY
2
LIMITTER, TORQUE
2016/9
1
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
The color of LIMITTER, TORQUE has
been changed from black to white.
been changed from black to white.